Loading ...
Loading ...
Loading ...
34
Concern Potential Cause Common Solution
Dispenser
Dispenser will
not dispense
water.
• Water filter not
seated properly.
• Water filter is clogged.
• Household water line
valve is not open.
• Remove and reinstall the water
filter. For
PurePour
, be sure to
push the filter in all the way until
it clicks into place and is secured
inside of the water filter housing.
• Replace filter cartridge. Be sure
to push filter all the way in until
it clicks into place and is secured
inside of the water filter housing.
• Open household water line
valve. See CONCERN column
AUTOMATIC ICE MAKER.
Water is not
cold enough.
• As warmer tap water
goes through the filter
and enters the water
supply system, the
chilled water is pushed
through to the dispenser.
Once the chilled water
is used up, it will take
several hours to bring the
freshly replaced water to
a cooler temperature.
• Add ice to cup or container
before dispensing water.
Note: Only the first 26 oz. are chilled.
Water has
an odd taste
and/or odor.
• Water has not been
dispensed for an
extended period of time.
• Unit is not properly con-
nected to cold water line.
• Draw and discard 10-12 glasses of
water to freshen the supply.
• Connect the unit to the cold
water line that supplies water to
the kitchen faucet.
Opening/Closing Of Doors/Drawers
Door(s) will
not close.
• Door was closed too
hard, causing other door
to open slightly.
• Refrigerator is not level.
It rocks on the floor
when moved slightly.
• Refrigerator is touching
a wall or cabinet.
• Food/packaging is
obstructing the door
from closing.
• Flipper mullion on left
fresh food door is not in
the correct position.
• Close both doors gently.
• Ensure the floor is level and solid,
and can adequately support the
refrigerator. Contact a carpenter to
correct a sagging or sloping floor.
• Ensure the floor is level and solid,
and can adequately support the
refrigerator. Contact a carpenter to
correct a sagging or sloping floor.
• Make sure no food/packaging
blocks the doorway.
• Ensure the flipper mullion is in the
correct position to allow the door
to close. (See Flipper Mullion
in INSTALLATION.)
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...