Loading ...
Loading ...
Loading ...
Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable appliance.
WARNING: Keep all objects at least 1 metre from the front, sides and
rear of the appliance
Place the fan on a dry, level and sturdy surface.
This fan can be operated by using the control panel at the top of the fan or by using
the remote control.
Control Panel
LED Display
After plugging in the fan to the power outlet, the LED display will turn on and display
the current room temperature.
Press the ON/OFF button and the fan will turn on automatically to LOW SPEED. Press
again to turn the fan off.
Press the SPEED button to select your desired speed level. Choose between LOW,
MEDIUM and HIGH speed.
The speed level is displayed on the LED screen
The fan is equipped with a TIMER that allows you to set its length of operation from 1
hour to 12 hours.
Pressing the OSC button will start and stop the oscillation function. The symbol is
displayed on the LED panel.
Press the MODE button to set the fan between NORMAL, NATURAL or SLEEP mode.
The mode is displayed on the LED screen.
• NORMAL - the fan just runs at the selected speed.
• NATURAL - the speed changes every 5 seconds in a cycle from low to medium to
high to medium to low to medium to high to medium to low etc.
• SLEEP – this mode reduces ventilation speed from one speed to the lower speed
every half hour.
• Maximum speed (H) set: the fan will run at maximum speed for 30 minutes,
then at medium speed for 30 minutes and then will switch to low speed until
the unit is turned off manually or by the timer if this has been previously set.
• Average speed (M) set: the fan runs at medium speed for 30 minutes then it
changes to minimum speed and the fan runs at minimum speed until turned off.
Loading ...
Loading ...
Loading ...