Loading ...
Loading ...
Loading ...
6
Display Panel
Using the Fridge
• To Turn On: Plug in the DC or AC power cable. The LED display on the control panel will
light up and the interior temperature will be displayed.
• Note: If the unit is o, only an orange LED will be illuminated. To turn on your unit please
hold the button down until the power LED changes to green and the LED display is
illuminated.
• Setting the Temperature: Press SET once and then the display will flash then press the
and buttons to adjust the temperature. Press the button to increase and the
button to decrease the temperature. The temperature will flash three times before
automatically setting in place. The display board will display the current temperature
inside the unit aer the target temperature is set. Aer approximately 5 minutes the
displayed temperature will start to decrease.
• Temperature setting range: -20°C to +10°C, 4°F to +50°F.
• To change the fridge between °C a °F. Press SET twice and then or to change the
setting. Press SET again to lock this in.
• Changing battery voltage protection: To change the battery voltage setting press the
SET button three times and then use the or to change the setting. Press SET once
to lock this in. The three voltage settings are as follows : (Evakool recommends you keep
the setting on LO).
LO – 10.4 Volts
NE – 11.2 Volts
HI – 12 Volts
+/- Buttons
On/O
Button
Set
Button
Digital
Display
Error
LED
Power
LED
TRAVELMATE XTREME
Loading ...
Loading ...
Loading ...