Loading ...
Loading ...
Loading ...
•-zah ytefas laitnetop fo esuaceb droc noisnetxe na fo esu eht diovA
ards under certain conditions. If it is necessary to use an extension
cord, use only a 3-wire extension cord that has a 3-blade grounding
plug and a 3-slot outlet that will accept the plug. The marked rating
of the extension cord must be equal to or greater than the electrical
rating of the appliance.
•detalusni ylreporp ton noitacol yna ni rotaregirfer ruoy llatsni ton oD
or heated e.g. garage etc. Your refrigerator was not designed to
operate in temperature settings below 55˚ Fahrenheit.
•ecafrus neve drah a no rotaregirfer eht rof noitacol elbatius a tceleS
away from direct sunlight or heat source e.g. radiators, baseboard
heaters, cooking appliances etc.
Install Limitations
Use of Extension Cord
Reversing the Door Hinge
1. Remove the top hinge cover.
eht gnidloh swercs eht evomer dna nesool ,revirdwercS daeH spillihP gnisU .2
top hinge in place.
3. Remove top hinge and carefully lift off the door.
ni sgulp eht tresni dna edis etisoppo eht morf sgulp eloh wercs eht evomeR .4
the screw hole openings of the just removed screws.
no rotaregirfer nrut ylluferac dna rotaregirfer eht ni smeti esool yna evomeR .5
its back and place in a secure area.
nesooL .6 the screws holding the lower hinge bracket to the refrigerator and
remove screws and bracket.
7. Remove (2) screws from the other side and insert in the previously removed
screw holes.
edisrednu eht ot tresnier dna esiwkcolc retnuoc gninrut yb nip rood evomeR .8
of the bracket and tighten.
9. Align bracket and insert (2) remaining screws into the holes provided .
10. Align hole in the door with the door pin and washer and gently push down
until
11. Align upper hinge bracket with screw holes insert screws and partially
secure, check that door and cabinet are properly aligned and then secure
tightly.
12. Replace hinge cap.
Loading ...
Loading ...
Loading ...