Loading ...
Loading ...
Loading ...
17
Location of Controls and Operation
Control panel Romote control
Main switch ON/OFF.
Flame brightness setting: L0, L1, L2, L3, L4, five brightness cycle adjustments.
Temperature down setting.
Temperature up setting.
Heating setting: Heat power 700W and 1400W.
Power switch ON/OF.
Timer: Timing 1-12 hours.
1
2
3
4
5
6
7
USE
The device can be operated either via the controls on the device or by means of the remote
control.
1. Turn on the main switch① of the fireplace to enter standby mode, and the display screen
will display the current temperature.
2. Press the power switch button⑥ to turn on the fireplace.
3. Press the heating button to switch power⑤, with high power displaying HI (1400W) and
low power displaying LO (700W)
4. Press the temperature setting button③④ to adjust the temperature, with a temperature
setting range of 59-95 °F. Press the up button to increase the temperature, and press
the down button to decrease the temperature. The default temperature is 77 °F.
5. Press the flame brightness button② to set the flame brightness:L0-L1-L2-L3-L4, L4-
brightest, L0- turn off the flame.
6. Press the timer button⑦ to set the timer function, 01-12 hours.
Remote Operation
● The standby switch located at the front right hand side above the fire must be first switch
on.
● It takes some time for the receiver to respond to the transmitter. Do not PRESS the
buttons more than once within two seconds for correct operation.
Loading ...
Loading ...
Loading ...