Anchor 811170 OWNER’S MANUAL

Loading ...

BEACON 2

BASIC SYSTEM OPERATION

3

1.

Unfold Beacon Line Array

2.

Securely attach the metal latches

3.

Set all Input Levels to minimum & Tone Controls to flat (middle) setting

4.

Plug wired microphone into the MIC 1 or MIC 2 jacks and/or any audio source into the LINE-IN jacks

5.

Switch Power to ON - Power On LED will light

6.

Slowly increase Level Controls for active Input Jacks to desired volume

7.

Adjust Tone Controls for desired sound quality

NOTE: Make all connections with shielded cables to avoid hum, buzzing, and interference.

To pair your Bluetooth enabled device, see the instructions on page 4.

To pair or unpair your AnchorLink wireless microphone or belt pack, see the instructions on page 5.

To operate the Anchor AIR, see the instructions on page 7.

WARNING!

Beacon Tower should be attached upright and clamp to its Base when in operation mode. Fold flip down and clamp

Tower to its Base when storing and transporting.

UNPLUG POWER CORD IF TOWER IS NOT ATTACHED TO ITS BASE!

Loading ...

Anchor 811170 Audio Beacon System 1 with Dual Mic Receiver, Wireless Beltpack, and Collar Mic