Loading ...
Loading ...
Loading ...
9
ENG
Functions
The picture above is only for reference. The actual configuration will depend on the physical product or
statement by the distributor.
1. When the power is on for the first time, full display shall last for 3 seconds, then enter into the normal
operation display;
(When the power is on for the first time, the setting temperature of refrigerator and freezer is 5’C/-
18’C respectively)
When there is a fault, the fault code is displayed; when there is no fault, the setting range of the
refrigeration compartment is displayed.
The display screen is on when the refrigerate door is open while the display screen is off when the
freeze door is closed;
2. Key operation
After each key operation of temperature adjustment, the corresponding set temperature flashes for 3S;
In the refrigeration temperature setting mode, long press the setting key
for 3S to switch to
the freezing temperature setting mode;
In the freezing temperature setting mode, long press the setting key
for 3S to switch to the
refrigeration temperature setting mode;
3. Locking and unlocking
The locking state shall be automatically entered after 30 seconds without key operation;
No manual lock/unlock settings;
4. When setting the refrigerating temperature, the temperature will cycle in the following order each
time the setting key is pressed. In the super cool state, LED4 and LED6 will light up at the same time.
Super cool exists for 6 h, as shown below:
5. Freezer setting
When setting the freezer temperature, the temperature will cycle in the following order each time
the setting key is pressed. In the super freeze state, LED1 and LED3 will light up at the same time,
superfreeze exists for 24 h, as shown below:
Recommended setting: Refrigerated chamber 5°C, freezing chamber -18°C.
6. When the door is opened, the the corresponding chamber lamp are on. There is no door opening
prompt tone and door opening alarm.
7. Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator.
Though the refrigerator may still have cold storage function with the following faults, the user shall
contact a maintenance specialist for maintenance, so as to ensure optimized operation of the
appliance.
Setting key LED1 LED2 LED3 LED4 LED5 LED6
Loading ...
Loading ...
Loading ...