Loading ...
Loading ...
Loading ...
8
Let’s Get Started!
Step 1: Testing
Before installing your AC, let’s test it to make sure it works properly and your outlet has the proper
power level. First, place it on a flat surface, plug it directly into a wall outlet (never use a power
strip or other device), and turn it on. Next, put the mode to High Cool and set the temperature
to Max Cool 7. After 3 minutes, the AC should be blowing cool air. If so, please continue on to the
next step. If not, please go to the Troubleshooting tips at the back of this guide or visit support.tcl.
com/us for additional help.
Step 2: Installation
A few quick notes before installing:
• This unit is made to fit inside a standard double-hung window between the sizes
of 23” and 36”.
• Check the size of your window before installing. The air conditioner can be installed without
the accordion panels to fit in a narrower window opening.
• The Lower Sash (the lower part of the window that moves up and down) must allow for 14.5”
of vertical clearance when open.
• The electrical outlet must be within reach of the power cord.
1. Use the included (4) 3/8” screws to fasten the top mounting rail to the unit.
1.
Top Mounting Rail
(4) 3/8” Screws
1/4”
2. Fasten the accordion style window panel expander pieces to the unit. They are marked
“Right” and “Left”. Pull the leading edge of them to its maximum width (Fig 2a). Then slide
the panel expanders into the grooved notches (slide downward) on the sides of the unit
(Fig 2b), and make sure they are inserted into the metal rails tightly (Fig 2c).
2a. 2b. 2c.
Top Mounting Rail
Filler panel
Filler panel
Bottom Rail
1/4”
Loading ...
Loading ...
Loading ...