Loading ...
Loading ...
Operation Guide 5576
E-29
3. When the timekeeping setting you want to change is flashing, use
D
and/or
B
to
change it as described below.
Screen To do this: Do this:
Toggle between 12-hour (
12H
) and 24-hour
(
24H
) timekeeping
Press
D
.
Reset the seconds to
00
• 30 to 59 seconds: Adds 1 to minutes
Change the hour or minute
Use
D
(+) and
B
(–).
Change the year, month, or day
4. Press
A
to exit the setting screen.
• The watch automatically adjusts its analog setting to match the currently display
digital time.
E-28
2. Press
C
to move the flashing in the sequence shown below to select the other
settings.
City Code
(page E-24)
Power Saving
(page E-49)
DST
(page E-25)
Seconds
Hour
Minute
YearMonthDay
Button Operation Tone On/Off
(page E-47)
12/24-Hour Format
C C C
C
C
C
CCC
C
C
• The following steps explain how to configure timekeeping settings only.
E-27
Configuring Current Time and Date Settings
To change the current time and date settings
1.
In the Timekeeping Mode, hold down
A
for about two
seconds until ADJ is displayed.
• This will cause the currently selected city code to
flash.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
City code
E-26
3. Use
D
to switch between the DST settings in the sequence shown below.
DST off
(
OFF
)
DST on
(
ON
)
D
• Note that you cannot switch between standard time and daylight saving time
(DST) while UTC is selected as your Home City.
4. After the setting is the way you want, press
A
to return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight Saving Time is turned on.
E-25
Note
• After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time in
your Home City.
* Coordinated Universal Time, the world-wide scientific standard of timekeeping.
The reference point for UTC is Greenwich, England.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
for about two
seconds until ADJ is displayed.
• This will cause the currently selected city code to
flash.
2. Press
C
to enter the DST setting screen.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
DST indicator
E-24
Configuring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To configure Home City settings
1. In the Timekeeping Mode, hold down
A
for about two
seconds until ADJ is displayed.
• This will cause the currently selected city code to
flash.
• For details about city codes, see the “City Code
Table” at the back of this manual.
2. Use
D
(East) and
B
(West) to scroll through the city
codes until the one you want to use as your Home City
is displayed.
3. After the setting is the way you want, press
A
to return
to the Timekeeping Mode.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
City code
E-23
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
• Each press of
A
cycles the Home City information as
shown below.
Month Second P indicator
Day Hour : Minutes
Press
A
. Day of week
A
A
A
Hour
Minutes
Month Day
E-22
General Functions (All Modes)
Unless specifically noted otherwise, the information in this section is applicable to all
modes.
Auto Return
• The watch returns to the Timekeeping Mode automatically if you do not perform any
button operation for two or three minutes in the Alarm Mode.
• If you leave the watch with a setting screen (flashing digits) displayed for two or
three minutes without performing any operation, the watch will exit the setting
screen automatically.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
Scrolling
The
B
and
D
buttons are used in the setting screen to scroll through data. In most
cases, holding down these buttons during a scroll operation scrolls through the data at
high speed.
E-21
Stopwatch Mode Countdown Timer Mode
Alarm Mode
C
C
C
E-20
Selecting a Mode
• Press
C
to cycle between modes.
• In any mode (except when a setting screen is on the display), press
B
to illuminate
the face of the watch.
Press
C
.
CC
Timekeeping Mode
World Time ModeBattery Level Indicator
Loading ...
Loading ...
Loading ...