Loading ...
Loading ...
Loading ...
Assembly Diagram Strainer and Metal Funnel
1.Align the notch on the "Single-cup/double-cup
strainer" with the notch on the "Metal funnel" and
pit it axially.
2.Rotate the "Single-cup/double-cup strainer" to
stick the bump into the "Metal funnel".
Before The First Use
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with warm water as
follows:
1. Open water tank cover, fill water into water tank, water level should not exceed the"MAX"mark in
water tank. Then close the water tank cover. (Note: the appliance is supplied with a detachable water
tank for easy cleaning, you can fill water tank with water first, and then attach water tank into the
appliance)
2. Set steel mesh into metal funnel (no coffee in steel mesh), make sure the tube on the funnel aligns
with groove in the appliance,then insert the funnel into the appliance from the"INSERT"position, and
fix them into coffee maker firmly by turning it anticlockwise until it is at the"LOCK"position.
3. Make sure steam control knob is on the "OFF" position.
4. Connect into power source, press power button for 3 second, power indicator is illuminated white.
The indicators of single-cup coffee button,double-cup coffee button,water button and steam button
flash, the machine begins preheating, after all indicators are solidly on, the preheating is completed.
(
Note: If preheating is not completed yet, press single-cup coffee button, double-cup coffee button or
manual button, the pump does not work; If you want to make steam, press the steam button.)
5. Press manual coffee button, the unit will pump water for about 30s, pour out the water in the cup.
Repeat several times and now the appliance is ready for making coffee.
Attention: There may be noise when pumping water for the first time, it is normal that the appliance
is releasing the air inside. After about 20s, the noise will disappear.
3
Loading ...
Loading ...
Loading ...