Loading ...
Loading ...
Loading ...
19
ed. The appliance is not ready for use until the cycle has
been completed.
• Whenever the machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of scalding!
During rinsing, a little hot water ows from the coee spouts.
Take care to avoid contact with splashes of water.
• To turn the appliance on or o, press the
button.
If you will not be using the appliance for some time, unplug
from the mains socket.
4. MAKING COFFEE BEVERAGES
4.1 Making
coee using
coee beans
• Do not use green, caramelised or candied coee beans as
they could stick to the coee mill and make it unusable.
• If “Energy Saving” mode is activated, there may be a few
seconds delay before the rst coee is delivered.
4.2 Making coee using pre-ground coee
• Never add pre-ground coee when the machine is o or it
could spread through the inside of the machine and dirty
it. This could damage the machine.
• Never use more than one level measure as it could dirty
the inside of the machine or block the funnel.
• Making LONG coee: halfway through prepara-
tion, when the
+ lights come on, add one
level measure of pre-ground coee and press the Long
button again.
• You cannot make Doppio+ coee using pre-
ground coee.
4.3 Varying the coee aroma
1. Press the button corresponding to the preferred aroma:
Mild
Medium
Strong
2. Select the desired coee beverage.
Please note:
• When the next coee is made, the machine will propose
the last aroma selected.
• In the event of power failure, the machine will revert to
the medium default setting.
4.4 Rinsing
Use this function to deliver hot water from the coee spouts to
clean and heat the appliance’s internal circuit.
To perform the rinse cycle, just press and hold the
button
for about 5 seconds. Delivery stops automatically (to interrupt
delivery earlier, press the same button again).
x 5 sec
4.5 Tips for a hotter coee
To make a hotter coee, proceed as follows:
• perform a rinse cycle (see paragraph “4.4 Rinsing”);
• warm the cups by rinsing them rst using the hot water
function;
• increase the coee temperature (see section “10. Settings
menu”).
4.6 Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
To adjust, while the coee mill is in operation, turn the dial as
follows:
If the coee is delivered too
slowly, or not at all.
This adjustment will not take ef-
fect until at least 2 cups of coee
have been delivered.
Turn one click towards “7”
For a fuller bodied creamier
coee
This adjustment will not take ef-
fect until at least 2 cups of coee
have been delivered.
Turn one click towards “1”
Please note:
The grinding adjustment dial must only be turned when the
coee mill is in operation during the initial phase of coee
preparation.
Loading ...
Loading ...
Loading ...