Loading ...
Loading ...
Loading ...
17 - ENWWW.SENIXTOOLS.COM
GENERAL
WARNING:
Always lubricate the cutting blade with protective
spray before use and storage.
1. Double check that all parts are properly fixed.
2. Check the product as well as accessories for damage
before each use. Do not use the product if it is damaged
or shows wear.
3. Ensure that the air vents are always unobstructed
and clear. Clean them if necessary with a soft brush.
Blocked air vents may lead to overheating and damage
the product
4. Wear eye, hearing, hand, foot and body protection.
5. Always hold the product on its handles. Keep the
handles dry and free from lubricant to ensure safe
holding.
6. Keep your body and feet in safety distance to cutting
head.
7. Inspect the area to be cut and remove any foreign
objects that will influence your cutting. If the foreign
objects can not be removed, e.g. wire fences, please
mark and remember it to avoid toughing them during
cutting.
8. Run the machine to top speed before cutting.
9. Switch the product off immediately if you are disturbed
while working by other people entering the working
area. Always let the product come to complete stop
before putting it down.
10. Do not overwork yourself. Take regular breaks to ensure
you can concentrate on the work and have full control
over the product.
NOTE:
In some countries regulations define at what time of the
day and on what special days products are allowed to be
used and what restrictions apply! Ask your community for
detailed information and observe the regulations in order
to preserve a peaceful neighborhood and avoid committing
administrative offences.
CUTTING TIPS
WARNING:
Never cut near electric cords or lines. If
blade jams on any electrical cord or line,
DO NOT TOUCH THE BLADE! IT CAN
BECOME ELECTRICALLY LIVE AND VERY
DANGEROUS. Continue to hold the hedge
trimmer by the insulated rear handle or lay it
down and away from you in a safe manner.
Disconnect the electrical service to the damaged
line or cord before attempting to free the blade
from the line or cord. Contact with the blade,
other conductive parts of the hedge trimmer, or
live electric cords or lines will result in death by
electrocution or serious injury.
• Clear the area to be cut before each use. Remove all
objects such as cords, lights, wire, or loose string which
can become entangled in the cutting blade and create a
risk of serious personal injury.
• Before starting the hedge trimmer, hold the unit with
both hands with the cutting blades directed away from
you. Always use the hedge trimmer properly.
• Do not force the hedge trimmer through heavy
shrubbery. This can cause the blades to bind and slow
down. If the blades slow down, reduce the pace.
• Do not try to cut stems or twigs that are larger than 3/4
in. thick, or those obviously too large to feed into the
cutting blade. Use a non-powered hand saw or pruning
saw to trim large stems.
• If blades do become jammed, stop the product, allow
the blades to stop and remove the battery pack before
attempting to remove the obstruction.
• If desired, you can use a string to help cut your hedge
level. Decide how high you want the hedge.
• Then, stretch a piece of string along the hedge at this
height. Trim the hedge just above this guide line of
string. Trim the side of a hedge so that it will be slightly
narrower at the top. More of the hedge will be exposed
when shaped this way, and it will be more uniform.
• Always hold hedge trimmer with both hands when
operating. Use a rm grip on the handles. Never hold
shrubs with one hand and operate the hedge trimmer
with the other. Improper operation of the hedge trimmer
could result in serious injury. The unit is used for cutting
in either direction in a slow, sweeping action from side
to side.
• Wear gloves when trimming thorny or prickly growth.
When trimming new growth, use a wide sweeping
action, so that the stems are fed directly into the cutting
blade. Older growth will have thicker stems and will be
trimmed easiest by using a sawing movement.
• The risk of the operation may occurs, such as the sharp
tree branches may cut the user's skin, the blade of
the unit may hurt the user's body. Always wear eye,
hearing, hand, foot and body protection to reduce the
risk of injury when operating this unit.
Loading ...
Loading ...
Loading ...