Tripp Lite OMNI1500LCDT Owner's Manual

Loading ...

Features

ON/OFF Button: Press and hold the POWER BUTTON for one second to turn the UPS on and off. If utility power is not available, pressing

this button will “cold-start” the UPS; i.e. turn it on and supply battery-derived power to the outlets.

MUTE/Select Button: Use this button to toggle power condition displays. Refer to Display UPS/Power Conditions section for details. This

button can also be used to place the unit in silent mode (mute the beeper completely) or to temporarily mute an active alarm by pressing

and holding until you hear an audible beep.

TEST Button: Press and hold this button and the UPS will begin a self-test lasting about 10 seconds.

Tel/DSL/NETWORK Line Protection Jacks: These jacks protect equipment against surges over a single phone line or network connection.

Connecting your equipment to these jacks is optional. Your UPS will work properly without this connection.

Coaxial Line Protection Jacks: These jacks protect equipment against surges over coaxial line. Connecting your equipment to these jacks

is optional. Your UPS will work properly without this connection.

USB Communication Port: This port can connect your UPS to any computer for automatic ﬁle saves and unattended shutdown in the event

of a power failure. Use with Tripp Lite’s PowerAlert

Software (available as a FREE download at www.tripplite.com/poweralert) and appropriate

USB cable. A USB cable is included with your UPS. This connection is optional. Your UPS will work properly without this connection.

Note: This UPS System provides basic communication compatibility with most integrated Windows

, Macintosh

and Linux

power management applications.

SURGE SUPPRESSION ONLY Outlets: These outlets offer premium surge suppression for accessories not requiring battery backup support.

These outlets are always energized when the UPS is connected to a live outlet, even if the UPS is turned off.

BATTERY BACKUP Outlets: These outlets offer battery backup support and premium surge suppression for critical devices requiring battery

backup support.

Note: Do not plug laser printers into the battery backup outlets.

Resettable Input Circuit Breaker: Protects your electrical circuit from overcurrent draw from the UPS load. If this breaker trips, remove

some of the load, then reset it by pressing it in.

Loading ...

Tripp Lite OMNI1500LCDT 1500VA UPS Battery Back Up AVR LCD Display 10 Outlets 120V 810W Tel & Coax Protection USB, 3 Year Warranty & $250,000 Insurance