To download the latest version of Quick Start
Guide, multilingual user manual, software,
or driver, etc., please visit Lumens
https://www.MyLumens.com/support
VC-BC301P
Ultra HD Camera
(UHD Box Camera)
User Manual - English
[Important]
1
Table of Contents
Chapter 1 Package Contents ........................................................................................... 2
Chapter 2 Function Introduction ..................................................................................... 3
2.1 I/O functions Introduction .............................................................................. 3
2.2 Tally Lamp Function Description ................................................................... 3
Chapter 3 Instruction for installation .............................................................................. 4
3.1 Basic Devices .................................................................................................. 4
Chapter 4 System diagram .............................................................................................. 5
Chapter 5 Remote Control and Setting Menu ................................................................ 6
5.1 Functions of remote control ........................................................................... 6
5.2 Setting Menu .................................................................................................... 7
Chapter 6 Network Function Settings Description ...................................................... 12
6.1 Web System Requirements .......................................................................... 12
6.2 Web Page Function Description .................................................................. 16
Chapter 7 Troubleshooting ............................................................................................ 30
Chapter 8 Safety Instructions ........................................................................................ 31
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information ..... 32
Copyright Information ................................................................................................... 33
2
Chapter 1 Package Contents
VC-BC301P
Power Cord
Power Adapter
Appearance may vary
depending on
country/region
Instruction for
installation
Adapter
Bracket Accessory Set
(For Japan only)
Quick Installation Guide
3
Chapter 2 Function Introduction
2.1 I/O functions Introduction
Front View Back View Bottom
NO.
Item
Function Descriptions
1
IR receive
Support infrared remote control
2
Tally Lamp
Display the Tally Lamp status of the camera
3
Lens
HD camera lens
4
Power indicator
Display the status of the camera
5
DC 12 V power
connector
AC power supply connecting port
6
Network port
Network cable port supports routers or hubs of IEEE802.3af with PoE
power supply
7
Audio input
Support Line In/Mic In audio input
8
HDMI 2.0 output
Connect to HDMI output signal source
9
USB 3.0 Type-B port
Connect to the computer using a USB cable; capture images via the
software
10
Reset button
Press and hold for 5 seconds to reset the machine
11
Tripod locating holes
Tripod locating holes
12
Tripod screw holes
Support 1/4”, 20 UNC
2.2 Tally Lamp Function Description
2.2.1 The tally indicator light function may be enabled through the control of VISCA
command. The setting method is as follows:
Tally Mode: 8x 01 7E 01 0A 01 0p FF
p = 0: OFF
p = 4: On (half-brightness)
p = 5: On (full-brightness)
4
Chapter 3 Instruction for installation
3.1 Basic Devices
3.1.1 VC-BC301P size
Length x Width x Height : 113 x 70 x 51 mm
Weight : 0.35 Kg
3.1.2 Installation method
You can use the included bracket accessory kit to install the camera on the wall or table
5
Chapter 4 System diagram
Computer
Line/MIC device Audio In
Display
POE hub
Power Supply
Microphone Amplifier
6
Chapter 5 Remote Control and Setting Menu
5.1 Functions of remote control
The remote control VC-IR01 is optional accessory
<Remark> The below functions are listed alphabetically.
Item
Description
,,,
Move the lens
Back Light
Turn on/off back light compensation
Camera
select
Choose Camera ID 1~3
Focus-
Manual /
Far/Near
Reserved
Focus-Auto
Reserved
Freeze
Freeze the screen
Home-Enter
Go back to the main page / Execute
Info
Status information
L/R
Direction Set
L/R Direction / Normal
Menu
Display OSD menu
Mirror
Rotate the image (OFF / Mirror / Flip /
Rotate)
Pan/Tilt
Reset
Clear the Pan / Tilt setting
Picture
Switch image effect (OFF / Neg / B&W)
Power
Power Switch
Preset
Appoint an ID (0~9) to save the current
position data
Reset
Appoint an ID (0~9) to delete the current
position data
Zoom-Fast
Adjust image size
Zoom-Slow
Fine-tune image size
7
5.2 Setting Menu
<Remark> Press [Menu] on the remote control to enter the setting menu; the bold
underlined values in the following table are defaults.
1
st
Level
Major Items
2
nd
Level
Minor Items
3
rd
Level
Adjustment Values
Function Descriptions
Exposure
Mode
1. Full Auto
2. Shutter Pri
3. Manual
Exposure mode setting
Exposure Comp.
On/Off
AE Level
Exposure Comp.
Level
-5~C~5
The value can be adjusted after
Exposure Comp. is activated
Spot Light
On/Off
Spot Light Position
X(0~6)Y(0~4)
The value can be adjusted after
Spot Light is activated
Shutter Pri
60/30
mode
50/25
mode
Adjustable when the Exposure
mode is set to Shutter Pri
1/10000
1/10000
1/5000
1/5000
1/3000
1/3000
1/2500
1/2500
1/2000
1/1750
1/1500
1/1250
1/1000
1/1000
1/725
1/600
1/500
1/425
1/350
1/300
1/250
1/215
1/180
1/150
1/120
1/120
1/100
1/100
1/90
1/75
1/60
1/50
1/30
1/25
1/15
1/12
1/8
1/6
1/4
1/3
1/2
1/2
1/1
1/1
8
1
st
Level
Major Items
2
nd
Level
Minor Items
3
rd
Level
Adjustment Values
Function Descriptions
Manual Gain
0dB/ 3 dB/ 6 dB/ 9 dB/
12 dB/ 15 dB/ 18 dB/ 21
dB/ 24 dB/ 27 dB/ 30 dB/
33 dB/ 36 dB/ 39 dB/ 42
dB/ 45 dB
Adjustable when the Exposure
mode is set to Manual
Manual Speed
60/30
mode
50/25
mode
Manually set the shutter
1/10000
1/10000
1/5000
1/5000
1/3000
1/3000
1/2500
1/2500
1/2000
1/1750
1/1500
1/1250
1/1000
1/1000
1/725
1/600
1/500
1/425
1/350
1/300
1/250
1/215
1/180
1/150
1/120
1/120
1/100
1/100
1/90
1/75
1/60
1/50
1/30
1/25
1/15
1/12
1/8
1/6
1/4
1/3
1/2
1/2
1/1
1/1
Gain Limit
9 dB/ 12 dB/ 15 dB/ 18
dB/ 21 dB/ 24 dB/ 27 dB/
30 dB/ 33 dB/ 36 dB/ 39
dB/ 42 dB/ 45 dB
Max. limit value of electron gain
WDR
1. Disable
2. 1
3. 2
4. 3
9
1
st
Level
Major Items
2
nd
Level
Minor Items
3
rd
Level
Adjustment Values
Function Descriptions
White Balance
Mode
1. Auto
2. Indoor
3. Outdoor
4. One Push WB
5. ATW
6. Manual
7. Sodium Lamp
Select the color temperature mode
1. 4000k ~ 7000k
2. 3200k
3. 5800k
4. 1700k ~ 10000k
5. 1700k ~ 10000k
6. Custom
7. 2800k
One Push Trigger
ENTER
One push trigger
Manual Red
0~ C~128
Adjustable when the white
balance mode is set to Manual
Manual Blue
0~ C~128
Adjustable when the white
balance mode is set to Manual
Picture
Picture effect
1. Disable
2. Neg
3. B & W
Sharpness
0~A~14
2D NR
1. Disable
2. 1
3. 2
4. 3
3D NR
1. Disable
2. Low
3. Typ
4. Max
Image Mode
1. Default
2. Custom
The user may customize his/her
desired image mode
Image Mode Load
ENTER
Adjustable when the Image mode
is set to Custom. After selected,
the corresponding Image mode
parameters will be read and
applied to Custom
Brightness
0~ A ~15
Adjustable when the Image mode
is set to Custom
Hue
0~ A ~15
Adjustable when the Image mode
is set to Custom
Saturation
0~ A ~15
Adjustable when the Image mode
is set to Custom
Gamma
0~ A ~3
Adjustable when the Image mode
is set to Custom
Pan Tilt Zoom
Pan Flip
On/Off
Activate the reverse Pan direction
Tilt Flip
On/Off
Activate the reverse Tilt direction
10
1
st
Level
Major Items
2
nd
Level
Minor Items
3
rd
Level
Adjustment Values
Function Descriptions
Zoom Mode
Clear Image
Zoom/Digital Zoom
D-Effect
Mirror
1. Disable
2. Mirror
3. Flip
4. Mirror + Flip
Set the mode at which the image
is mirror or flipped
Ethernet
DHCP
On/Off
Enable/Disable DHCP setting
using left and right arrow keys
and press [ENTER] to apply
setting.
IP Address
192.168.100.100
Press [ENTER] to be in modify
mode; select the item to be
modified using the up and down
keys, and modify the value using
the left and right keys or the
numeric keys.
Subnet Mask
255.255.255.0
Press [ENTER] to be in modify
mode; select the item to be
modified using the up and down
keys, and modify the value using
the left and right keys or the
numeric keys.
Gateway
192.168.100.254
Press [ENTER] to be in modify
mode; select the item to be
modified using the up and down
keys, and modify the value using
the left and right keys or the
numeric keys.
Audio
Audio In
Line In/Mic In
Set Audio In
Audio Enable
On/Off
Turn on/off audio output
Audio Volume
0~ A ~10
Audio Volume Setting
Audio Delay
On/Off
When the audio is not
synchronized with the video,
enable this function to set the
audio delay time
Audio Delay Time
(ms)
-1~-500ms
Set audio delay time
Encode Type
1. AAC
2. G.711
Set audio encode type
11
1
st
Level
Major Items
2
nd
Level
Minor Items
3
rd
Level
Adjustment Values
Function Descriptions
Encode Sample
Rate
1. 48 KHz(AAC)
2. 44.1 KHz(AAC)
3. 16 KHz(AAC)
4. 16 KHz(G.711)
5. 8 KHz(G.711)
Set the encode type and sample
rate
System
Prompt
On/Off
Turn on/off the prompt information
on the display
IR Receive
On/Off
When it is Off, the remote control
will not be able to control the
camera. At this moment, turn off
and then turn on the power to
restore control of the remote
control.
Tally Lamp
On/Off
Select to enable or disable Tally
Lamp function.
Language
English/Chinese
Initial Position
Last MEM/ 1st Preset
Select the camera lens to return
to the last operated position or the
first preset position after POWER
ON
Output Mode
1. 3840x2160/59.94p
2. 3840x2160/50p
3. 3840x2160/29.97p
4. 3840x2160/25p
5. 1080p/59.94
6. 1080p/50
7. 1080p/29.97
8. 1080p/25
9. 720p/59.94
10. 720p/50
11. 720p/29.97
12. 720p/25
13. 1080i/59.94
14. 1080i/50
Choose the output resolution
Factory Reset
On/Off
Resume the factory default setting
Status
Display the current setting status
12
Chapter 6 Network Function Settings Description
6.1 Web System Requirements
6.1.1 Web Browser:
Internet Explorer 11 or above
FireFox 66.0.3 or above
Chrome 73 or above
Edge 42.17134 or above
Safari 12.1 or above
6.1.2 Using Lumens VMS Software to View the Images
The VC-BC301P DHCP initial setting is ON. If VC-BC301P is connected to the local area network
(LAN), the camera IP can be retrieved via the following methods
Install Lumens VMS software (Please download from the Lumens official website,
https://www.mylumens.com/support)
Open LUMENS VMS software
Search for the camera: Press [automatically search for the device] button to locate the
VC-BC301P camera
Click VC-BC301P in the list and start operation after connecting to network
<Note> When using automatic search, the camera and computer must be in the same
network segment, e.g.: 192.168.4.X
13
6.1.3 Using the Browser to View the Images
Open the browser, and enter the URL of VC-BC301P in the IP address bar
E.g.: http://192.168.100.100 (default IP address)
Enter administrator’s account and password
Account: admin (Default)
Password: 9999 (Default)
6.1.4 Using RTSP Player to View the Images
In addition to the browser and VMS, other free softwares also can be used for RTSP connection, such as
VLC, Quick Time and PotPlayer
RTSP connection address formats are as follows:
RTSP Main Streaming (1080P@H.265) => rtsp://camera IP:8554/hevc
RTSP Sub1 Streaming (1080P@H.264) => rtsp://camera IP:8557/h264
RTSP Sub2 Streaming (720P@H.264) => rtsp://camera IP:8556/h264
Example: Open VLC software and enter URL: rtsp://192.168.4.48:8557/h264
14
6.1.5 Get VC-BC301P images/Adjust parameter settings by connecting the computer via USB
View the images
VC-BC301P can be connected to a PC via a USB cable as a USB video source, and used with a USB
video software conference system, such as Skype and Zoom.
Example: Enter Skype settings, go to audio and video page, and select VC-BC301P as the
camera source
15
Adjust parameter settings and control VC-BC301P
In addition to using the optional remote control VC-IR01, you can also download AMCAP software.
Select VC-BC301P as the Devices image source
Click Options > Video Capture Filter to open the Properties Window to adjust the parameter settings
and control VC-BC301P
16
6.2 Web Page Function Description
6.2.1 Login Screen
No
Item
Function Descriptions
1
Username
Enter user account (default: admin)
2
Password
Enter user password (default: 9999)
3
Language selection
Currently, the system supports English, Traditional Chinese and
Simplified Chinese
4
Remember password
Save user account name and password to the browser. When you log
in next time, there is no need to re-enter them
5
Login
Log into the administrator screen on the website
5
4
3
2
1
17
6.2.2 Viewing In Real Time
No
Item
Function Descriptions
1
Pan/Tilt setting
Adjust the Pan/Tilt position of the camera screen (ePTZ)
2
Zoom ratio
Adjust the zoom-in or zoom-out ratio via scroll bar
3
Preview window
Display the screen currently captured by the camera
4
Power button
Turn on or turn off the camera power
5
Preset setting
Select the number first and then select SAVE or LOAD
6
Switch to Full Screen
Switch the preview window to full screen
2
3
5
4
1
6
18
6.2.3 Account Management
No
Item
Function Descriptions
1
Add user account
Enter a user name and password to add a new user
2
Permission setting
Set the new account management permissions
User Type
Admin
Operator
Viewer
View Images
Y
Y
Y
Settings
Y
Y
N
Account
Management
Y
N
N
3
Applying setting
Add the newly created user to the list of account
4
List of accounts
Edit: Modify the user password and permissions
Delete: Delete the user account
1
2
3
4
19
6.2.4 Setting - System Setting
No
Item
Function Descriptions
1
Resolution
Set the resolution of the camera, resolutions supported by the camera
are as follows:
3840x2160/60p/ 59.94p/ 50p/ 30p/ 29.97p/ 25p
1080p/60/ 59.94/ 50/ 30/ 29.97/ 25
720p/60/ 59.94/ 50/ 30/ 29.97/ 25
1080i 59.94/50
After switching the resolution, the camera will restart. If there are no
images on the website, please refresh the browser
2
Output source
According to the output resolution, you can select HDMI + streaming
output or HDMI + UVC output
<Remark> UVC option is limited to less than the 3840x2160/29.97p
(inclusive) resolution
3
HDMI format
Select YUV422, YUV420, or RGB
<Remark> YUV420 is limited to two resolution options: 3840x2160/59.94p
and 3840x2160/50p
1
2
3
20
6.2.5 Setting - Video
No
Item
Function Descriptions
1
Camera name
Modify the camera name
Camera names are limited to 1-12 characters
Please use a camera name by mixing uppercase and lowercase
letters or numbers. Do not use “/” and “space” or special symbols
2
Camera Location
Modify the location of the camera, such as ROOM 1
Camera location is limited to 1-12 characters
Please use a camera name by mixing uppercase and lowercase
letters or numbers. Do not use “/” and “space” or special symbols
3
Streaming 1 /
Streaming 2 /
Streaming 3
This can be seen when Settings - System Settings - Output Signals
is set to HDMI + Streaming
Supports 3 streaming outputs. Please refer to 6.2.5.1 Streaming
Parameter Setting for relevant settings
4
Open Streaming
Confirm whether or not the streaming function is opened
5
UVC
This can be seen when Settings - System Settings - Output Signals
is set to HDMI + UVC
Encode Format:
3840x2160 / 29.97 / 25 : H.264
Less than 1080p (inclusive): H.264/MJPEG
Resolution: It is shown based on Settings - System Settings -
Resolution
Frame Rate: 3840x2160 can only select the highest 29.97
1
2
3
4
21
6.2.5.1 Streaming parameter setting
Function
Streaming 1
Streaming 2
Streaming 3
Encode Format
H.265
H.264
Resolution
4K / 1080P / 720P
1080P / 720P
640x360
Frame Rate
Setting according to the supported resolution
Bit Rate(kbps)
Range
2,000~20,000
2,000~20,000
512~5,000
Factory
Default
15,000
7,500
1,000
Rate Control
CBR / VBR
IP Ratio
Setting according to the supported resolution
6.2.6 Setting - Camera
No
Item
Function Descriptions
1
Zoom ratio
Adjust the zoom-in or zoom-out ratio via scroll bar
2
Exposure
Mode: Select exposure mode (Automatic/Shutter Priority/Aperture
Priority/Manual)
Exposure Comp. Level: Select exposure compensation level
Gain: The gain limit is adjustable when the exposure mode is set to “Manual”
WDR: Set the level of wide dynamic range (WDR) in order to obtain better
images
Shutter Speed: The shutter speed is adjustable when the exposure mode is
set to “Manual” or “Shutter Priority”
4
3
2
1
5
22
3
White
Balance
Mode: Select the color temperature mode
Auto
Indoor
Outdoor
One Push WB
ATW
Manual
Sodium Lamp
Open Push WB: One push color temperature is adjustable when the white
balance mode is set to “One Push WB”
Manual Red/Blue: Manually adjust blue/red color temperature
4
Mirror
Mirror: Set the mode at which the image is mirror and flipped
Off
Mirror
Flip
Mirror + Flip
5
Tally Lamp
Enable/Disable Tally Lamp function
<Remark> When it is disabled, the Tally indicator will not receive RS232 commands to
trigger Enable or Disable
23
6.2.7 Setting - Picture
No
Item
Function Descriptions
1
Picture Effect
Set picture effect, Off/Neg/Black and White
2
2D noise reduction
settings
2D noise reduction settings, selecting from Off/1/2/3
3
3D noise reduction
settings
3D noise reduction settings, selecting from Off/Low/Typ/Max
4
Image mode
By selecting Default/Custom, the user may customize his/her desired
image mode
5
Image Mode Load
When no custom setting is needed, reset the picture parameters back
to the factory default by selecting this item
6
Gamma
Gamma Level adjustment; Adjustable when the image mode is set to
Custom
7
Brightness
Brightness adjustment; Adjustable when the image mode is set to
Custom
8
Contrast*
Contrast adjustment; Adjustable when the image mode is set to Custom
9
Saturation
Saturation adjustment of the image; Adjustable when the image mode
is set to Custom
10
Sharpness
Adjust the sharpness of the image
10
9
8
7
6
5
4
3
2
1
24
6.2.8 Setting - Audio
No
Item
Function Descriptions
1
Open audio
Turn on/off sound
2
Soundtrack effect
setting
Set MIC In/Line In
3
Audio Volume
Adjust Audio Volume
4
Audio Delay
Turn on/off audio delay
5
Audio Delay Time
Set audio delay time for -1~-500 ms
6
Encode Format
Set encode format as ACC/G.711
7
Encode sample rate
Set audio sample rate
48 KHz (AAC)
44.1 KHz (AAC)
16 KHz (AAC)
16 KHz (G.711)
8 KHz (G.711)
1
2
3
4
5
6
7
25
6.2.9 Setting - Network
No
Item
Function Descriptions
1
Network
Network setting of camera. Change of setting is available only when DHCP
function is closed.
2
RTMP/RTMP-S
Setting
Copy the RTMP/RTMP-S web address provided by the RTMP/RTMP-S
service platform and paste it to the RTMP/RTMP-S connection address to
publish the camera images on the RTMP/RTMP-S service platform
To upload to YouTube for live streaming, please see 6.2.8 Settings -
Audio to turn on the audio function first
3
RTSP Setting
Enable/Disable Multicast. It is suggested to enable Multicast when the
number of users online watching the live image simultaneously is more
than 4
4
MPEG-TS Setting
1. Port must be set in the range above 1024 with a maximum value of 9999
The following port has been used by the camera. Setting of the port may
not connect correctly
8554, 8556, 8557, 8080, 9090, 1935
1
2
3
4
5
6
7
26
5
SRT Setting
1. Set the field of SRT and then check the item to open SRT streaming
After the SRT streaming is opened, it will be connected automatically
upon startup
2. The port number must be set in the range above 1024 with a maximum
value of 9999
The following port has been used by the camera. Setting of the port may
not connect correctly
8554, 8556, 8557, 8080, 9090, 1935
3. Delay time is for 20 to 8,000 microseconds. The default value is 120
microseconds
6
SNTP Setting
Set SNTP Server IP
7
Port Setting
Set HTTP and HTTPS ports. The default values are Port 80 and Port 81
respectively
<Remark> Change of setting is available only when DHCP function of camera is
closed
6.2.10 Setting - Time
No
Item
Function Descriptions
1
Camera Time
Display the date and time of the camera
2
Set the Time
Manual Configuration: Set time manually
Synchronize with computer time: Set the camera time according
to the computer time
Synchronize with SNTP server: Set the camera time
synchronously with the SNTP server
<Remark> SNTP server address: Please change in network setting
1
2
27
6.2.11 Setting - Maintenance - Upgrading Firmware
No
Item
Function Descriptions
1
Firmware Update
The camera firmware may be upgraded via web page. For the upgrade
method, please download the FW upgrade manual from Lumens official
website
6.2.12 Setting - Maintenance - Incident Log
No
Item
Function Descriptions
1
Event Logs
If the camera encounters errors, an error code log will be established
<Remark> If an error code appears, the user may try to clear and confirm
if the error will repeat itself
28
6.2.13 Setting - Maintenance - System Service
No
Item
Function Descriptions
1
Reset to the default
value
Select the reset button to resume the factory default setting as the web
page setting
2
Setting File
The web page setting parameters can be exported from the computer
and imported/applied to another camera
6.2.14 Setting - Maintenance - Reboot
No
Item
Function Descriptions
1
Reboot
Reboot immediately
2
Disable
Disable the reboot settings
3
Daily reboot
Set the daily reboot time
<Remark> Please go to Settings - Time to complete the SNTP server
synchronization to set daily reboot
4
Timing Reboot
Set the timing reboot time
1
2
VC-BC301P
1
2
3
4
29
6.2.15 About
No
Item
Function Descriptions
1
Camera name
Display the camera name
2
Firmware Version
Display the firmware version of the camera
3
Serial No.
Display the camera serial No.
1
2
3
30
Chapter 7 Troubleshooting
This chapter describes problems you may encounter while using VC-BC301P. If you have
questions, please refer to related chapters and follow all the suggested solutions. If the problem
still occurred, please contact your distributor or the service center.
No.
Problems
Solutions
1.
Boot without power signal
1. Make sure you have plugged in the power cord.
2. When using a PoE connection, ensure that the power supply
supports IEEE 802.3af hubs
2.
There is no image output from
VC-BC301P
1. Check the power supply or PoE supply functions.
2. Confirm the output signals are in streaming output.
3. If the camera is connected to a monitor, confirm the monitor
equipment supports 4K output.
4. Replace the cables and make sure they are not faulty.
3.
VC-BC301P image is severely
delayed
1. Please use 4K, 1080p or 720p 60/50 Hz signals rather than
25/30 Hz signals.
4.
RS-232 over IP cannot be
controlled
1. Please make sure the port number (52381) is set correctly
2. For related command settings, please download the Command
Set Manual from Lumens official website
5.
The ONVIF software cannot
find the machine
Please make sure that [Setting]> [Video]> [Camera ID]/[Location]
in the webpage uses only English letters or numbers. The ONVIF
software cannot find the machine if you use special characters and
space.
31
Chapter 8 Safety Instructions
Always follow these safety instructions when setting up and using the VC-BC301P UHD Box Camera:
1 Operation
1.1 Please use the product in the recommended operating environment, away from water or source of heat.
1.2 Do not place the product on a tilted or unstable trolley, stand or table.
1.3 Please clean the dust on the power plug prior to usage. Do not insert the product’s power plug into a
multiplug to prevent sparks or a fire.
1.4 Do not block the slots and openings in the case of the product. They provide ventilation and prevent the
product from overheating.
1.5 Do not open or remove covers, otherwise it may expose you to dangerous voltages and other hazards.
Refer all servicing to licensed service personnel.
1.6 Unplug the product from the wall outlet and refer servicing to licensed service personnel when the following
situations happen:
If the power cords are damaged or frayed.
If liquid is spilled into the product or the product has been exposed to rain or water.
2 Installation
2.1 For security considerations, please make sure the standard hanging rack you bought is in line with UL or CE
safety approbations and installed by technician personnel approved by agents.
3 Storage
3.1 Do not place the product where the cord can be stepped on as this may result in fraying or damage to the
lead or the plug.
3.2 Unplug this product during thunderstorms or if it is not going to be used for an extended period.
3.3 Do not place this product or accessories on top of vibrating equipment or heated objects.
4 Cleaning
4.1 Disconnect all the cables prior to cleaning and wipe the surface with a dry cloth. Do not use alcohol or
volatile solvents for cleaning.
5 Batteries (for products or accessories with batteries)
5.1 When replacing batteries, please only use similar or the same type of batteries.
5.2 When disposing of batteries or products, please adhere to the relevant instructions in your country or region
for disposing of batteries or products.
Precautions
This symbol indicates that this equipment may
contain dangerous voltage which could cause
electric shock. Do not remove the cover (or
back). No user-serviceable parts inside. Refer
servicing to licensed service personnel.
This symbol indicates that there are
important operating and
maintenance instructions in this
User Manual with this unit.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
Notice :
The changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment..
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
IC Warning
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set
out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de
Classe A prescrites dans la norme sur le material brouilleur: "Appareils Numeriques," NMB-003 edictee par
l'Industrie.
EN55032 CE Warning
Operation of this equipment in a residential environment could cause radio interference.
Warning: Operation of this equipment in a residential environment may cause radio interference.
32
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Manufacturer：Lumens Digital Optics Inc.
Product Name：VC-BC301P
Model Number：UHD Box Camera
Responsible Party – U.S. Contact Information
Supplier：Lumens Integration, Inc.
4116 Clipper Court, Fremont, CA 94538, United States
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
33
Copyright Information
Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not provided by Lumens Digital Optics
Inc. unless copying this file is for the purpose of backup after purchasing this product.
In order to keep improving the product, the information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may refer to names of other products or
companies without any intention of infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any possible technological,
editorial errors or omissions, nor responsible for any incidental or related damages arising from providing this file,
using, or operating this product.
