Loading ...
Loading ...
Loading ...
AVAHLABLE ACCES._ ,OR ES
Use only accessories recommended for this belt / disc
sander. Follow instructions that accompany accessories.
Use ol improper accessories may cause hazards.
Visit your Sears Hardware Department or see the Sears
Power and Hand Tool Catalog for the following
accessories:
o Adhesive-backed Discs 6 inch:
Fine, Medium, or Coarse Griics
o Sanding Belts 4 x 36 inch:
Fine, Medium, Coarse, or Extra Coarse Grits
oAbrasive Disc & Belt cleaner
Use only accessories designed for this belt / disc sander to
avoid injury from thrown broken parts or workpieces.
Sears may recommend other accessories not listed in this
manual. See your nearest Sears store or Power and Hand
Tool Catalog for other accessories.
Do not use any accessory unless you have completely
read the instruction or owner's manual for that accessory.
If any part is missing or damaged, do not plug the belt /
disc sander in until the missing or damaged part is
replaced, and assembly is complete.
Carefully unpack the belt / disc sander and all its parts,
and compare against the illustration below.
To protect the belt / disc sander from moisture, a
protective coating has been applied to the machined
surfaces. Remove this coating with a soft cloth moistened
with WD-40.
To avoid fire or toxic reaction, never use gasoline, naphtha,
acetone, lacquer thinner or similar highly volatile solvents
to clean the belt / disc sander.
_EM
A.
B.
C.
D.
E.
R
G.
H,
I.
J.
K.
L.
M.
N.
O.
R
Q.
R.
DESCRiPTiON _QUANTITY
Belt / Disc Sander 1
Disc 1
Disc housing 1
Disc table 1
k/liter gauge 1
Disc dust chute 1
Belt dust chute 1
Loose parts in bag:
"Fablesupport rod 1
Belt backstop 1
Hex key 1
Open-end wrench 1
Hex head bolt t
Long pan head screw 40mm 1
Pan head short screws 2
Pan head thin screws 1/2" 2
Pan head medium screws 12ram 1
Large washer 1
Small washers 2
B
c
G
H I L M
N O
@ @@
Q R
6 ::: : :: : : : ::: ::: : ;:::::::::::
Sanding disc
\
Disc housing Back stop Tension lever Sanding belt
Table assembly
Disc dust chute
Hex key
: : : : :: ::,::: :: :::
Idler drum
Bett tracking knob
stop
Mounting hole
On/Off switch
_tor_ge Miter gauge
J
Table support rod
Table Iock knob
Bevel scale
7 :!' ::_ :i
Loading ...
Loading ...
Loading ...