Loading ...
Loading ...
Loading ...
Using the headphones
12 | IE 80S BT
Pairing the headphones with a Bluetooth
device
1. Switch the headphones on (
> 16) and place them close to the
Bluetooth device (max. 20 cm).
2. Press and hold the multi-function button for 2 seconds until you
he
ar the voice prompt “Pairing”.
The LED flashes blue and red. The headphones are in pairing
mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluet
ooth devices.
All active Bluetooth devices in the proximity of your Bl
uetooth
device are displayed.
5. From the list of found Bluetooth devices, select “IE 80S BT”
. If
necessary, enter the default pin code “0000”.
If pairing was successful, you hear the voice prompts “Pairing
successful
” and “Device (1) connected”. The LED lights up blue for
3 seconds.
“Pairing“
1
2
3
4 5
***
IE 80S BT
Keyword: 0000
Menu
Bluetooth on
Bluetooth off
Menu
Add Device
< 20 cm
ON
2s
Hold
2s
Hold
Connected
3s
“Device (1)
connected“
“Pairing
successful“
If no connection is established within 3 minutes, pairing mode
is terminated and the headphones switch to standby mode. If
necessary, repeat the steps described above.
You can adjust and change the time interval when the head-
phones switch to standby mode.
To be able to use this function, you require the Smart Control
ap
p (
> 13).
Loading ...
Loading ...
Loading ...