Loading ...
Loading ...
Loading ...
8
IN THE EVENT OF A PROBLEM
• Do not disassemble the appliance yourself. A poorly repaired appliance may be dangerous for the user.
• Check the troubleshooting table below before contacting an Approved Service Center:
Problem Check Solution
The appliance does not
switch on.
Is the power cord connected?
Connect the power cord to a plug
with the correct voltage.
Are all the display elements off?
Press the on/off button and select the
required function.
Is there a power outage?
You can use your purifier once the
power turns on again.
The air flow does not
change automatically.
Is the appliance in manual mode? Select the correct operating mode.
The flow is a lot weaker
than before.
Does the filter need to be cleaned or
replaced?
Check the filter cleaning and
replacement frequencies and clean/
replace the filter(s) if necessary.
There is an unpleasant
smell coming from the air
outlet.
Is the sensor lens covered with dust?
Check the filter cleaning and
replacement frequencies and clean/
replace the filter(s) if necessary.
The air quality indicator
does not change color.
Does the light still indicate poor air
quality?
Clean the sensor lens.
WARRANTY
Do not use the appliance and contact an Approved Service Centre if:
– your appliance has been dropped;
– your appliance or its power cord are damaged;
– your appliance no longer functions properly.
You can find a list of Approved Service Centres on the Rowenta international warranty card.
HELP PROTECT THE ENVIRONMENT!
Your appliance contains many materials which can be recovered or recycled.
Leave it at a local waste collection point or take to an approved service center so that it can be processed.
These instructions can also be found on our internet site, at www.rowenta.com.
Loading ...
Loading ...
Loading ...