1 ). Place the blender on a dry and horizontal surface.
2). Clear the blender cup, assemble the cup on the body,
and lock the cup to the appointed position.
3). Open the sound insulation cover, put about 300g of ice
cubes into the blender cup, then put the sound
insulation down. Connect the power supply and press
.The control panel indicates the lamp“STOP" twinkle,
to show the appliance is power on, and check
4). Choose the suitable speed mode or pulse mode, and let
the unit operate continuously for a short time(less than
the rated working period). Press the "STOP" button and
5). Repeat the above step until the ice shake is done, then
cut off the power, wait for the motor stops running.
Making ice shake
Maintenance
1. Avoid any bumping of the appliance, otherwise, it will
be deformed or broken.
2. After usage, please clean the appliance and wipe the
parts with a dry cloth and store it in a dry and ventilated
place.
The product should be turned on or used in the
presence of someone, and unplugged if the person
leaves.
The process of the blending must be monitored, to avoid any accidents
happened that cannot be attended to during the process.
Do not spray volatile oils, paints, or insecticides on
products.
Can cause electric shocks, or fire accidents.
Be sure to pull off the plug when you are not in use
for a long time or when you are out of town.
There are still parts in the power-on state when standby, which may
due to insulation deterioration or leakage of electricity that caused
the fire.
Do not pull the power cord when pulling off the plug. Always pull it off
by the plug.
Please make sure to plug in the power cord before use.
Make sure that the plug fits tightly with the socket.
There must be no loosening or incomplete insertion.
Damage to the power cord or socket is the cause of leakage and bums.
If the power cord is damaged, it must be replaced by the serviced office
of the manufacturer, or a similarly qualified person to avoid danger.
Do not trample on the power cord
Switch off the power when you are out or sleeping at
night.
The utility can avoid the fire accident and can save electricity.
It can cause cracks, odors and fire accidents.
Do not allow products to be inhaled or put into
combustible substances! And shall not be used where
exist motor oil composition
Do not use it in the wet places such as bathrooms.
Can cause poor insulation. Causing a leakage or malfunction.
Do not use damaged power cord or plug
This is the cause of electric shock, short circuits, and fire.
Do not use multiple power cord sockets
Do not using extension cord sockets or sharing sockets with other
electrical appliances, that may cause overheat or fire hazards by.
Do not unplug the power cord with a wet hand.
Do not risk electric shock by unplugging the plug with a wet hand when
the power supply needs to be unplugged.
Loading ...
