Loading ...
Loading ...
Loading ...
digital display. The cycle time can be increased or decreased using
the up and down arrow keypads. The time and temperature selec-
tion may be adjusted manually at any time before or during the cy-
cle.
Favorite
The Favorite cycle keypad allows the user to save different cycles,
selections and options for later use. Nine favorite cycles can be
saved.
1. Press the Favorite keypad. The control will display the cycle and
modifier seings for the first Favorite cycle. The 2-digit display
will switch between F1 and the cycle time for the selected cycle.
2. Press the keypads for the desired cycle, selection and option
seings.
3. Press the Favorite keypad to save the seings. The next Favor-
ite cycle, F2, will be displayed. It can be programmed now.
4. Press the Start/Pause or Delay Start keypad to save the set-
tings and start the cycle.
5. Press the Power/Cancel keypad to discard the current seings
and exit Favorite mode.
DRY2755N_SVG
AUTO-SENSING
MANUAL
Heavy
Duty
Favorite
Power
Cancel
Selections
The following selections can be used to modify the currently chosen
cycle. The default selections will be lit after choosing a cycle.
Temp
Press the Temp keypad to change a Manual cycle’s temperature.
Choose from No Heat, Low, Medium or High.
Dryness
Press the Dryness keypad to change the dryness level in an Auto-
Sensing cycle. Choose from Damp, Less Dry, Near Dry or Dry.
Damp Leaves load slightly damp for
easier ironing.
Less Dry Use for lightweight items such
as sheets and shirts.
Near Dry Use for normal loads.
Dry Use for heavy items such as
blue jeans and blankets.
Over-drying can cause wrinkling, shrinking, excessive lint conditions,
and will use more energy than necessary. To increase energy savings
and to make sure loads are dried without over-drying, set your Au-
to-Sensing loads on Near Dry or Less Dry. If items are damp or
over-dry at the end of a cycle, increase or decrease the Dryness
seing the next time these loads are dried. Remember the seings
that work best to get ideal drying results.
Moisture Level
The Moisture Level status lights will be lit during an Auto-Sensing
cycle. The Sensing light will be lit at the beginning of the cycle.
The Wet, Damp and Dry lights will be lit based on readings from the
moisture sensing system.
Options
The following options can be used to modify the currently chosen
cycle, signal volume and control lock.
Anti-Wrinkle
This option prevents wrinkling by tumbling the clothes load after
the end of the cycle every two minutes for up to 60 minutes. The
display will show the time remaining. The option will end if the door is
opened.
EcoDry
The EcoDry option will reduce total energy consumption by de-
creasing the temperature of the cycle seing by 10% after the ini-
tial temperature seing has been reached.
Signal
Pressing the Signal keypad will change the end of cycle signal vol-
ume. There are four seings: Off, Low, Medium, High.
If the Anti-Wrinkle option is selected the signal will sound each time
the dryer tumbles.
Control Lock (Secure keypad)
Pressing and holding the Signal keypad for three seconds will turn
on the Control Lock. The Control Lock status light will be lit. While
Control Lock is on, no other keypad presses are allowed. Press and
hold the Signal keypad again to turn the option off.
Status
The Status lights are lit during the cycle to show what part of the
cycle is running.
Door Open
The Door Open status light is lit
any time that the dryer door is
open.
Heating The Heating status light is lit
to indicate that a heat portion
of the cycle is currently operat-
ing.
Table continues...
Operating Your Dryer
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
11 Part No. D514473R6
Loading ...
Loading ...
Loading ...