Hoover HOC3B3558IN

Instructions Manual - Page 3

For HOC3B3558IN.

PDF File Manual, 18 pages, Read Online | Download pdf file

HOC3B3558IN photo
Loading ...
Loading ...
EN 03
parts. After cleaning, reassemble them according the instructions.
Only use the meat probe recommended for this oven.
Do not use a steam cleaner for cleaning operations.
IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITHOUT
PLUG:
THE APPLIANCE MUST NOT BE CONNECTED TO THE POWER SOURCE
USING PLUG OR SOCKETS, BUT MUST BE DIRECTLY CONNECTED TO
THE SUPPLY MAINS. The connection to the power source must be
carried out by a suitably qualified professional. In order to have an
installation compliant to the current safety legislation the oven must
be connected only placing an omnipolar breaker, with contact
separation compliant to the requirements for overvoltage category
III, between the appliance and the power source. The omnipolar
breaker must bear the maximum connected load and must be in line
with current legislation. The yellow-green earth cable should not be
interrupted by the breaker. The omnipolar breaker used for the
connection must be easily accessible when the appliance is installed.
The connection to the power source must be carried out by a suitably
qualified professional considering the polarity of the oven and of the
power source.
The disconnection must be achieved incorporating a switch in the
fixed wiring in accordance with the wiring rules
IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITH PLUG:
The socket must be suitable for the load indicated on the tag and
must have ground contact connected and in operation. The earth
conductor is yellow-green in colour. This operation should be carried
out by a suitably qualified professional. ln case of incompatibility
between the socket and the appliance plug, ask a qualified
electrician to substitute the socket with another suitable type. The
plug and the socket must be conformed to the current norms of the
installation country. Connection to the power source can also be
made by placing an omnipolar breaker, with contact separation
compliant to the requirements for overvoltage category III, between
Loading ...
Loading ...
Loading ...