Loading ...
Loading ...
Loading ...
DJI RS 3 Mini
User Manual
19
©
2023 DJI All Rights Reserved.
Touchscreen
Home
Indicates the current user profile. Users can set and save three user profiles: M1, M2,
and M3.
Indicates a camera control cable is connected.
Indicates Bluetooth is connected.
Indicates Sport Mode is enabled. In Sport Mode, the follow speed of the gimbal
increases. It is suitable for shooting in scenarios where subjects move suddenly and at
fast speeds.
70
Displays the current battery level of the gimbal.
Auto Tune
Use Auto Tune after balancing. Auto Tune provides the proper stiffness for the motor according
to the payload to obtain the optimum gimbal performance.
The three values indicate the stiffness of the three axes on the Auto Tune page. Users can also
manually change the motor stiffness of the three axes. The motor stiffness adjustment allows
you to fine-tune the power that is applied by the motors as they react and balance the weight
on each axis. Make sure you leave an extra margin to ensure stability at all times. If the stiffness
value is too high, the gimbal may shake. If the value is too low, the gimbal performance will be
affected.
Balance Status
When the status bar shows green, this indicates the gimbal is balanced. If the status bar shows
yellow, the gimbal is slightly unbalanced. The status bar shows red when the gimbal is critically
unbalanced. In this case, re-balance the corresponding axis. To check the balance status of the
pan axis, tilt the gimbal 15° left or right and check the status bar. To check the balance status of
the tilt axis, use the joystick to rotate the gimbal until the camera lens points upward, and then
check the status bar.
PF
70
Follow Speed
Loading ...
Loading ...
Loading ...