Loading ...
KNOW YOUR KETTLE
SETTING UP
All illustrations are for representation only, your
model may vary from the illustrations shown.
In the interest of improving products, Dualit Ltd. reserves the
right to change the product speci cation without prior notice.
A
D
B
G
C
E
L
K
J
I
H
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
LID
TOUCH PAD
LID PANEL
SPOUT
WATER FILTER
STEAM TUBE
STAINLESS STEEL BODY
LID RELEASE
VIEWING WINDOW
BODY PANEL
ON/OFF SWITCH
POWERBASE
CLEANING & CARE
1 3
Unplug and let the kettle cool down completely
before cleaning. Remove the kettle from the
power base.
Wipe the outside and inside surfaces of the
kettle with a damp cloth. Ensure that all
connectors and sockets are kept dry. Do not
immerse the kettle or power base in water or
any other liquid. Do not use harsh or abrasive
cleaners or solvents.
Unplug and let the kettle cool. Open the lid.
Hold the top of the lter, pull up and out of
the kettle. Rinse under a tap while carefully
brushing it with a soft brush. Rinse the kettle
out with fresh water. To replace, align the lter
with the grooves in the lter holder, insert and
push back into place. DO NOT OPERATE
KETTLE UNLESS THE WATER FILTER
IS CORRECTLY IN POSITION.
Use descaling products suitable for kitchen
appliances, these are readily available online or
from most supermarkets or department stores.
Use as per instructions on the packet.
Follow these few simple steps to minimise
scale build up in your kettle: Empty the kettle
after each use; do not allow water to stand in
the kettle overnight. Use ltered water instead
of tap water. Descale the kettle regularly, at
least once a month. If you live in a hard water
area you may need to descale more often.
When descaling has nished, empty the kettle
and rinse it out a minimum of 3 times with
fresh water, then re ll with fresh water, boil,
then discard boiled water. FAILURE
TO DO SO CAN CAUSE INJURY.
DO NOT BOIL KETTLE WITH
DESCALING SOLUTION IN IT.
THE BODY
2
WATER FILTER DESCALE REGULARLY
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
BOILING WATER
1
Plug the kettle into the power socket. Press the
‘On/Off’ switch down. The power neon will
illuminate and the kettle will start to heat up.
If the kettle is accidentally switched on with no
water inside, the boil-dry device will switch off the
heating element to prevent damage to the kettle.
The kettle will automatically turn off after the
water has boiled and the neon light will go out.
To turn off before the water has boiled lift the
‘On/Off’ switch up.
Always unplug the kettle after each use.
Remove kettle from the power base. When lling
or carrying the kettle, do not tilt it backwards, as this
may allow water to pass through the steam tube
onto the control area. Should this happen, the kettle
must be allowed to dry before re-using. To avoid the
risk of splashing, once the kettle has boiled wait 10
seconds then pour slowly. Do not over-tilt the kettle.
TURN ON
3
POURING
2
TURN OFF
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
WARNING: IF THE KETTLE HAS JUST BOILED, IT WILL BE FULL OF STEAM, WHICH WILL ESCAPE AS SOON AS
THE LID IS OPENED.
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
1 32
FILLING YOUR KETTLE
Ensure the kettle is unplugged. Remove the
kettle from the power base. Pull the knob up
and towards the handle to open the lid. The lid is
hinged for easy opening and closing.
WARNING: IF THE KETTLE HAS JUST
BOILED, THE LID WILL BE HOT. USE
THE KNOB TO CLOSE THE LID.
WARNING: IF THE KETTLE HAS JUST BOILED, IT WILL BE FULL OF STEAM, WHICH WILL ESCAPE AS SOON AS
THE LID IS OPENED.
Fill the kettle through the lid opening. Use at least
one cup of water (250ml). The water level must
stay below the ‘max’ mark. Save energy, only boil
what you require. Keep kettle upright and level at
all times when lling (maximum 15
o
incline). Do
not tilt kettle backwards. DO NOT OVERFILL
OR FILL THROUGH THE SPOUT.
CAUTION when
lling to ensure
water does not go
down steam tube,
preventing the
kettle from correct
operation.
OPEN LID FILLING STEAM
TUBE
3
Push the lid down
using the knob to
close. Check that it is
fully in place, otherwise
the kettle may not
switch off when boiling.
CLOSE
LID
F
WARNING: IF THE KETTLE HAS JUST BOILED, IT WILL BE FULL OF STEAM, WHICH WILL ESCAPE AS SOON AS
THE LID IS OPENED.
4
Do not operate in a tray. Ensure water lter is in place. DO NOT
OPERATE KETTLE UNLESS THE
WATER FILTER IS CORRECTLY IN
POSITION.
NOT IN A TRAY
5
WATER FILTER
1
Place the kettle as close to the wall socket as
possible. When in use ensure the kettle is not
placed under kitchen cabinets. DO NOT
STORE OR USE YOUR KETTLE IN
AN APPLIANCE GARAGE OR UNDER
CUPBOARDS.
Use the shortest cord possible. Wrap excess
cord round the cord tidy on the base of the
kettle.
POSITION
3
INCLINED PLANE
2
CORD TIDY
Do not operate on an inclined plane.
DON’T FORGET TO
REGISTER YOUR KETTLE
WWW.DUALIT. COM/REGISTER
OR BY POST
Any other servicing should be performed by authorized service representative.
INSTRUCTIONS ON ENVIRONMENT PROTECTION
Do not dispose this product in the usual household garbage at the end of its life cycle. Please hand it over to a collection point for the recycling of
electrical and electronic appliances. The symbol on the product, the instruction of use or the packaging will inform you about the methods of disposal.
The materials are recyclable as mentioned on its marking. By recycling, material recycling or other forms of re-utilization of old appliances you are
making an important contribution to protect our environment. Please enquire at the community administration for the authorised disposal location.