Loading ...
Loading ...
Loading ...
How to Wire Your Ceiling Fan (continued)
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the keyslot twist-lock feature. (Figure 1b)
1. Remove one of the two shoulder screws in the
hanger bracket. Loosen the second shoulder screw
without fully removing it. Assemble canopy by
rotating key slot in canopy over shoulder screw in
hanger bracket. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that
was previously removed. (Figure 1a)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
NOTE: This step is applicable after the neccessary
wiring is completed.
12
How to Install Your Canopy Housing
Figure 1a
How to Assemble Your Fan Blades
1. Position the blade over the blade holder with threaded
posts showing. Make sure the bottom edge of the blade
is fully seated against the blade holder. With a screwdriver
tighten 3/16˝-24 serrated head screws and flat washers
to secure the blade to the blade holder. (Figure 1)
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
CAUTION
Figure 1b
Ceiling
Canopy
x 15
x 15
FLAT WASHER
3/16˝-24
SERRATED HEAD
SCREW
HARDWARE USED:
Blade
3/16˝-24 Serrated Head
Screw and Flat Washer
(3 each per blade)
Blade Holder
Figure 1
4. Once the connection has been made, slide the
receiver into the hanger bracket, taking care not to
pinch the wires. (Figure 5)
Receiver
Hanger Bracket
Figure 5
Canopy Screw
Cover
Loading ...
Loading ...
Loading ...