Loading ...
Loading ...
Loading ...
OPERATING INSTRUCTIONS
HANDLE INSTALLATION
The appliance ships with the handle inside the
cabinet to protect it from damage. It must be
installed by the end user. The appliance should be
unplugged before installing the handle.
1. Position the handle over the exposed door
handle posts.
2. Remove the two screws from the side of door
with a screwdriver, insert screws into the handle
bracket, fi x it to the side of door and tighten it
until snug.
Note: The handle may look slightly different based
on the colour of the appliance.
TEMPERATURE SETTING
TEMPERATURE SCALE
OPEN DOOR ALARM
This appliance is equipped with a door alarm that
will sound if the door is left open for more than 3
minutes. The alarm will beep and the display will
fl ash continuously until the door is closed.
"FRIDGE"：0℃~8℃（32°F~46°F）
"SUBZERO"：-4℃~-8℃（25°F~18°F）
"FREEZE"：-14℃~-24℃(7°F~-11°F)
"FASTFREEZE"：-28℃(-18°F)
LOCK AND UNLOCK
CONTROL PANEL
This appliance can be used as either a refrigerator
or a freezer. The table below shows the MODE and
temperature ranges. Select the MODE. Then set the
desired temperature by pressing the Up and Down
arrows on the Control Panel. The temperature increases
or decreases in one degree increments. The display
window will show the selection.
After no operation for two minutes, the control
panel will be deactivated. The appliance will
will be dimmed.
was locked and then will switch to temperature
display. At this moment, press and hold “F/C”
for three seconds. The appliance will beep and
panel activated.
1. Temperature display
2. Temperature Mode
3. Up and Down arrows to
select temperature
4.
Selection button for °F or °C
(press and hold for 3 seconds
to activate the control panel)
1
2
3
4
Loading ...
Loading ...