Loading ...
Loading ...
Loading ...
21
v.02222023
Operation Instructions
Self-clean Function (Available only for certain heat pump inverter models)
8°C Heating Function
1. Press and at the same time toward the indoor unit.
- You will hear a “beep” sound from the indoor unit.
- is displayed on the display.
- The self-cleaning function will run for about 30 minutes, then it will
return to the previous mode.
2. You can press to cancel this function during the process.
- You will hear “beep- beep” when the process is nished or cancelled.
1. Press and hold 3 seconds to activate this function.
- or is displayed on the display.
- The function will return into stand by when the room temperature
reaches 48°F or 9°C.
- The appliance will automatically cancel this function when room
temperature is higher than 64°F or 18°C.
2. Press and hold 3 seconds to deactivate this function.
This function helps carry away the accumulated dirt, bacteria , etc. from the
indoor evaporator.
This function automatically starts HEAT mode when the room temperature
is lower than 46°F or 8°C.
NOTE:
• It is normal that the unit makes some noise during self-cleaning process as plastic materials
expand and contract with temperature change.
• It is recommended to operate this function when the indoor ambient temperature is under
86°F / 30°C, and the outdoor ambient temperature between 41°F to 86°F / 5°C to 30°C.
• It is suggested to run the self-cleaning function every 3 months.
Loading ...
Loading ...
Loading ...