Loading ...
Loading ...
Loading ...
Installation Instructions
_ REPARING THE REAR WALL
FOR OUTSIDE BACK EXHAUST
(continued)
House
Duct
Damper Hinge OnTop
Damper Swings
[]Fit the exhaust adaptor into the house duct as
shown. Make sure the exhaust adaptor (with the
damper) is squared up in the house duct and lines
up with the holes in the mounting plate.
[]Remove the paper flom the stick), side of the 28"
foam tape. Press the sock), side onto the face of the
exhaust adaptoL (Don't stretch the foam tape.)
/I)7 ount,no/ II
J _ Plate iDU
°o*__Jl_°, °° °, °° °, "°°o',°° "°°°°o'° °°°o °°°o *°°°
t_ t"-I t-'-t t"l
_Atmch the other 28" foam rope to the flont of
the mounOng plate around both of the exhaust
openings where it will touch the microwave.
I-_ ATTACH THE MOUNTING
PLATE TO THE WALL
i
Attach the plate to the wall using toggle bolts.
At least one wood screw must be used to attach
the plate to a wall stud.
Remove the toggle wings flom the bolts.
_ Insert the bolts into the mounting plate through
the holes designated to go into drywall and reattach
the toggle wings to :X" onto each bolt.
16
To use toggle bolts:
Mounting
Plate
O
Spacingfor TogglesMore
-_]_-_i_-- ThanWall Thickness
ToggleWings
BoltEnd
_ Place the mounting plate against the wall and
insert the toggle wings into the holes in the wall to
mount the plate.
NOTE: Before 0gbtening toggle bolts and wood
screw, make sure the robs on the mounting plate
touch the bottom of the cabinet when pushed flush
against the wall and that the plate is properly
centered under the cabinet.
CAUTION: Be careflll to avoid pinching fingers
between the back of the mounting plate and the wall.
_ Tighten all bolts. Pull the plate away flom the wall
to help tighten the bolts.
I-_ USE TOP CABINET TEMPLATE
FOR PREPARATION OF TOP
CABINET
You need to drill holes for the top support screws and
a hole large enough for the power cord to fit tllrough.
%
• Read the instrucOons on the TOP CABINET
TEMPI_ATE.
• Tape it underneath the top cabinet.
• Drill the holes, following the instruc0ons on the
TOP CABINET TEMPLATE.
CAUTION: Wear safety goggles when drilling holes
in the cabinet bottom.
Loading ...
Loading ...
Loading ...