Casio GA-B001AH

User Manual - Page 17

For GA-B001AH.

PDF File Manual, 27 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Alarm
The watch will beep when an alarm time is
reached. You can set up to five different
alarms. The hourly time signal causes the
watch to beep every hour on the hour.
An alarm will not sound if the battery is low.
Using CASIO WATCHES to
Configure Alarm Settings
If the watch is paired with a phone, you can
also use CASIO WATCHES to set alarms.
l
Configuring Watch Settings
Configuring Alarm Settings
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (D) to scroll through alarm numbers
([AL1] to [AL5]) until the alarm you want to
configure is displayed.
Alarm number
Alarm time
3. Hold down (A) for at least two seconds.
Release the button when the hours digits
start to flash.
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Alarm hour
4. Use (B) and (D) to change the hour setting.
Holding down (B) or (D) scrolls through
settings at high speed.
If you are using 12-hour timekeeping,
[P] indicates p.m.
5. Press (C).
This causes the minutes digits to flash.
Alarm minute
6. Use (B) and (D) to set the minute setting.
7. Press (A) to complete the setting
operation.
[ALM] is shown on the display while an
alarm is set.
To stop the alarm
Pressing any button while the beeper is
sounding stops it.
Note
A beeper sounds for 10 seconds when
an alarm time is reached.
The watch will automatically return
from the Alarm Mode to the
Timekeeping Mode if you do not
perform any operation for about two or
three minutes.
Enabling the Hourly Time
Signal
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Use (D) to display the hourly time signal
screen ([SIG]).
3. Press (A) to toggle the hourly time signal
between enabled and disabled.
[SIG] is displayed while the hourly time
signal is enabled.
Watch Operation Guide 5690
17
Loading ...
Loading ...
Loading ...