Loading ...
Loading ...
3
3
www.comfortzoneproducts.com
ASSEMBLY INSTRUCTIONS:
Simple assembly is required to use this fan on a table or oor.
Snap legs to fan cradle (Fig. 1). Short side of base leg should
face the front of the fan. Long side should face the back of the
fan - the side with the Rotary Speed Dial ( Fig. 2).
Fig 1
Fig 2
Long Side Faces
Rear of Fan
USAGE:
Fan Operation: Always operate the fan in the upright position
following all instructions and recommendations listed in this
manual.
Fan Location: Place the fan in the area of the room that will
provide proper fan cooling.
Fan Connection: Plug fan directly into 120 volt A.C., 60 Hz
wall outlet. Be sure plug ts tightly in outlet. A loose connection
may cause overheating and damage to the plug or fan.
Note: To prevent overloading a circuit, do not plug the fan into
a circuit that is servicing other electrical needs.
FAN TILT:
This fan can tilt 180° to direct airow for maximum comfort.
Grasp the fan body and tilt the fan to desired angle. Ratchet
action will keep the fan at the selected angle. Do not force fan
around cradle past 180°.
CONTROL PANEL:
Turning Fan On/Off: To start the fan, turn rotary
dial to desired speed setting.
• 0 - OFF
• 1 - LOW
• 2 - MEDIUM
• 3 - HIGH
Rotate the dial to «0» - OFF to
discontinue use. Unplug fan when not in use.
Loading ...