Loading ...
NOTE:
1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall.
2. Do not seal the range to the side
cabinets.
3.24" (61 cm)minimum clearance
between the cooktop and the
bottom of the cabinet when the
bottom of wood or metal cabinet
is protected by not less than Y4"
(0.64 cm) flame retardant
milIboard covered with not less
than No. 28 MSG sheet metal,
0015"(0.4 ram) stainless steel,
0.024"(0.6 mm) aluminum, or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum
clearance when the cabinet is
unprotected.
4. For cutouts below 22 7/8" (58.1
cm), appliance will slightly show
out of the cabinet.
5. Allow at least 19 V4" (48.9 cm)
clearance for door depth when it
is open.
21%"
(55.25 cm
Figure 1
A
Door Open i _/
(see note 5)
f
J
"_ ,D
Side panel
*IMPORTANT: To avoid cooktop glass breakage for cutout width (E dimension) of
more than 301/16'' (75.4 cm), make sure the appliance is centered in the counter
opening while pushing into it. Raise leveling legs at maximum position, insert the
appliance in the counter and then level. Make sure the unit is supported by the
leveling legs not by the cooktop glass itself.
IMPORTANT: Cabinet and countertop
width should match the cutout width,
E
22 7/8" (58.1 cm) rain.
23 1/4" (59.05 cm) max.
, (see Note 4) -_
1 118"
/ (2.86 cm)
FRONT
OF _ F
CABINET Ref
FA. HEIGHT_CoIOOTKHrOP i D DEPTHTo--ECUTOUTWIDTH*** i F. CUTDUT " G. HEIGHT i
FRONT OF RANGE ] (Countertop and 1 DEPTH I DE CDUNTERTOP I
l Cabinet) ]
28 5/I6" (71,9cm 30+_ / 6" 36 5/8"(93era) Max
Loading ...
Loading ...
Loading ...