Loading ...
Loading ...
Loading ...
Stand plate screws
:
6 M5x12mm
Stand neck
component
screws
: 4 M5x20mm
5
Warning:
Never place a television set in an unstable location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be avoided by taking simple
precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television set.
- Only using furniture that can safely support the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
-
Not placing the television set on tall furniture (for example, cupboards or bookcases) without
anchoring both the furniture and the television set to a suitable support.
-
Not placing the television set on cloth or other materials that may be located between the
television set and supporting furniture.
-
Educating children about the dangers of climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained and relocated, the same considerations as
above should be applied.
Step 1 Set up your TV
Ready for the step-by-step? You’re only minutes away from TV bliss!
Warning: To avoid the danger of suffocation, keep plastic packaging away from babies, children,
and pets. Do not use packaging bags in cribs, beds, carriages, or playpens.
Remove your TV from the box
Be careful, it’s heavy!
Note: We recommend having three (3) people help to safely install the stands. While two (2)
people securely hold the TV upright, another person should install the stands. Make sure
the installation direction of the stand is the same as illustrated.
Please remove the
protective film after installation.
Put the table stand into place and fix it with 4 M5x20mm screws from the accessory bag. You
have two options to install the table stand at a higher or lower position. Dig out the plastics in
screw holes by a screwdriver before installing the table stand at a higher position.
Stand installation is completed.
Take the stand neck component and neck plate as illustrated, then match the stand
neck with the stand plate and fix it with 6 M5x12mm
screws from the accessory bag.
Carefully remove the middle foam packaging of the TV. Keep the foam packaging on
the left and right sides attached as shown.
A
B
C
D
To use the stand
A
C
D
B
1
2
or
Higher position
Lower position
Loading ...
Loading ...
Loading ...