Loading ...
Loading ...
Loading ...
- 12 -
- The filters may also be washed in the dishwasher.
The aluminium panels may alter in colour after several washes. This is not cause for customer complaint nor
replacement of panels.
• The active carbon filters help to purify the air that is replaced in the environment.
Carbon filters are available on
request from your retailer.
The filters are not washable nor re-useable and must be replaced at maximum every four months. The saturation of
the active carbon filter depends on the frequency of use of the appliance, by the type of cooking and the regularity
of cleaning the anti-grease filters.
• Clean the fan and other surfaces of the cooker hood regularly using a cloth moistened with denatured alcohol or
non abrasive liquid detergent.
• The illumination installation is designed for use during cooking and not for prolonged general illumination of the
environment. Prolonged use of the illumination installation notably reduces the duration of the bulb.
• LIGHT REPLACEMENT - HALOGEN
12 volt 20 W Halogen.
Remove the glass retaining ring and glass.
Replace the globe with another of the same type.
Replace the glass and retaining ring.
• CONTROLS: (Fig.18) For model BIC120X - BICG90X only:
A = LIGHT
B = OFF
C = SPEED I
D = SPEED II
E = SPEED III
F = AUTOMATIC STOP TIMER - 15 minutes (*)
• INTENSIVE speed function: press key E for two seconds and it will be activated for 10 minutes after which it will
return to the previously set speed. When the function is active the LED flashes. To interrupt it before the 10 minutes
have expired press key E again.
• By pressing key F for two seconds (with the hood switched off) the “clean air” function is activated. This function
switches the appliance on for ten minutes every hour at the first speed. As soon as this function is activated the
motor starts up at the first speed for ten minutes, During this time key F and key C must flash at the same time.
After ten minutes the motor switches off and the LED of key F remains switched on with a fixed light until the motor
starts up again at the first speed after fifty minutes and keys F and C start to flash again for ten minutes and so on.
By pressing any key for the exclusion of the hood light the hood will return immediately to its normal functioning (e.g.
if key D is pressed the “clean air” function is deactivated and the motor moves to the 2nd speed straight away. By
pressing key B the function is deactivated).
(*) The “automatic stop timer” delays stopping of the hood, which will continue functioning for 15 minutes at the
operating speed set at the time this function is activated.
• Active carbon/grease filter saturation: Fig.19B / Fig.20
- When button A flashes at a frequency of 2 seconds, the grease filters must be cleaned.
- When button A flashes at a frequency of 0.5 seconds, the carbon filters must be replaced.
After the clean filter has been replaced, the electronic memory must be reset by pressing button A for approximately
5 seconds, until the light on the button stops flashing.
•CONTROLS :(Fig.19) For model BIC90X only:
A = LIGHT
B = OFF
C = SPEED I
D = SPEED II
E = SPEED III
G = MOTOR WORKING indicator
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED BY BREACHING
THE ABOVE WARNINGS.
Loading ...
Loading ...
Loading ...