Loading ...
Loading ...
Loading ...
- 24 -
• Mounting the hood on the wall (Fig.11A):
Position the xing template on the wall Fig.11B (considering the minimum distance from
the cooker top).
- Make 4 holes respecting the measurement indicated in the gures (Fig.11C).
- Fix the 2 upper screws A without tightening them completely along with the plugs
Fig.11A.
- Hang the hood on the wall, aligning it in a horizontal position and tighten/fasten the
2 screws A. When it has been regulated, x it denitively using the 2 safety screws B
(Fig.11A).
For the various installations use screws and screw anchors suited to the type of wall (e.g.
reinforced concrete, plasterboard, etc.). If the screws and screw anchors are provided
with the product, check that they are suitable for the type of wall on which the hood is
to be xed.
• Limited to installation on plasterboard walls: make sure that the screws are xed to the
wall support elements. If this is not the case, install a support structure made up from 2
by 4 inch cross members in correspondence with the screw anchorage points.
Fig.11
Loading ...
Loading ...
Loading ...