Loading ...
Loading ...
Loading ...
• 18 •
ENGLISH
DESCALING
Limescale normally builds up with
the use of the appliance. Use the
GAGGIA descaling product only.
Its formula has been designed to
ensure better machine performance
and operation for its whole operat-
ing life. If correctly used, it also
avoids alterations in the brewed
product. Never use vinegar or other
descaling agents.
Descaling should be performed
every 2 months.
Warning! Never drink the descaling solution or any
products dispensed until the cycle has been carried out
to the end.
1. Remove the lter holder from the unit by turning it
from right to left .
2. Remove and empty the water tank (see the chapter
"Cleaning the water tank").
3. Pour HALF the content of the descaling solution into
the water tank and ll it with fresh water up to the
max level.
4. Turn on the machine by pressing the on / o button
(Fig.1-2)
Dispense 2 cups of water (approximately 150 ml each)
(see chapter “Hot Water Dispensing”) from the steam
wand and then another two cups of water (approxi-
mately 150 ml. each) from the coee brewing unit,
by pressing the coee button (Fig.1- 1).
Turn o the machine by pressing the on / o button
(Fig.1-2).
5. Let the descaling solution take eect for approxi-
mately 20 minutes with the machine turned o.
6. Turn on the machine by pressing the on / o button
(Fig.1-2).
Dispense 2 cups of water (approximately 150 ml. each)
from the steam wand and then another two cups of
water (approximately 150 ml. each) from the coee
brewing unit.
Turn o the machine by pressing the on / o button
(Fig.1-2) and leave it o for 3 minutes.
7. Repeat the water dispensing described in step 6, until
the water tank is completely empty.
8. Rinse the water tank and ll it with fresh drinking
water. Empty the drip tray.
9. Place a container under the steam wand. Open the
steam/hot water knob (Fig.1-7) slowly by turning it
counter-clockwise.
Press the brew button (Fig.1-1) and the steam button
(Fig.1-3).
10. Dispense the whole water tank content through the
steam wand. To stop dispensing, press the brew but-
ton (Fig.1-1) and the steam button (Fig.1-3) again and
close the knob by turning it clockwise.
11. Fill the water tank with fresh drinking water. Insert
the lter holder into the brew unit (Fig.1-8) and turn
it from left to right until it locks into place.
12. Place a suitable container under the lter holder.
13. Press the coee button (Fig.1-1) and dispense all the
water in the tank. Once the tank is empty, stop dis-
pensing by pressing the coee button again (Fig.1-1)
Finally, empty the container.
14. Remove the lter holder from the unit by turning
it from right to left and rinse it with fresh drinking
water.
15. Repeat the operations from step 8 once again, for a
total of 4 tanks. The machine is now ready to be used.
16. The descaling cycle is now complete.
17. Rell the water tank with fresh water. If necessary,
load the circuit as described in the chapter "Loading
the Circuit".
4219-465-10451 MANUAL GAG. CLASSIC EVO PRO EU Rev 00.indd 184219-465-10451 MANUAL GAG. Classic Evo EU Rev 00.indd 18 03/11/2022 11:51:1303/11/2022 11:51:13
Loading ...
Loading ...
Loading ...