Loading ...
Loading ...
Loading ...
PROBLI_M CAUS_:D BY SOLUTiOH
Dishes not dry ,,Water is not hot
Spotting and
filming
,COOL DRY option
selected
oImproper loading
,,Rinse agent
dispenser empty
, Hard water
,,Water is not hot
,COOL DRY drying
option selected
,,Not enough or
poor quality
detergent
oOtd detergent
°No rinse agent
oRaise water heater thermostat to 140°F if
necessary..
oDo not select COOL DRY drying option. Allow
dishes to dry in heated air.
,Load dishes so items drain properly.. Avoid
overloading°
-Fill rinse agent dispenser if empty°
_Fill detergent cups to capacity. Use dishwasher
detergent with highest available phosphorous
content, May be necessary to install a water
softener..
=Raise water heater thermostat to 140°R
, Drying without heat may cause some
spotting. Do not select COOL DRY option.
-Use more fresh automatic dishwasher
detergent° Use detergent with highest
available phosphorous content,
especially if you have hard water.
• Use only fresh, automatic dishwasher
detergent. Store tightly closed in a cool, dry
ptace_ Discard old, lumpy or separated
detergent, Do not fill detergent dispenser
until ready to wash,
-Fill rinse agent dispenser.
To remove stubborn spots and film from
glassware:
1. Remove all metal utensils from the
dishwasher.
,
3_
4.
Do not add detergent,
Select POTS PANS cycle,
Start the dishwasher and allow to run for .
t8 to 20 minutes. The dishwasher will now
be in the main wash°
5. Then open the door and pour 2 cups
(500 ml) white vinegar into bottom of
dishwasher.
6. Close the door and allow to complete the
cycler
if vinegar rinse doesn't work: Repeat as
above, except use 1/4 cup (60 ml) of citric
acid crystals instead of vinegar. (Most
drugstores carry citric acid crystals.)
16
Loading ...
Loading ...
Loading ...