Loading ...
Loading ...
Loading ...
User’s GUide — 31
Simple Offset – Unknown Bend Angle
Find the center-to-center travel and unknown bend angle for a
pipe offset with a 16” Offset and 27” Run.
Unknown
Bend Angle
27˝ Run
16˝ Offset
Travel
KEYSTROKE DISPLAY
0.
1. Enter Offset:
OFST 16 INCH
2. Enter Run:
7 RUN 27 INCH
3. Find the pipe length:
TRAV 31-3/8 INCH
4. Find the bend angle:
/
_
Ø 30.65°
Continue pressing the Travel key to view all related values.
Simple Offset – Cut Length
Find the cut length (end-to-end) for a pipe offset with a 10”
Offset and a 12” Run. The bend angle is unknown. This example
assumes 6” Steel, factory made long radius butt weld elbows are
used. The following example shows an optional override of the
Welder’s Gap when working with Stainless Steel.
Note: All Take-Out calculations are based on Carbon Steel
O.D. See the Cut Length – Known Take-Out Value example
to solve Cut Lengths for known Take-Out values.
Loading ...
Loading ...
Loading ...