Loading ...
Loading ...
Loading ...
Menu item Description
Job Buering
O
On
Auto
Temporarily stores jobs on the printer hard disk before printing
Notes:
• O is the factory default setting.
• The On setting buers jobs on the printer hard disk.
• The Auto setting buers print jobs only if the printer is busy processing
data from another input port.
• Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Mac Binary PS
On
O
Auto
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
• Auto is the factory default setting.
• The O setting filters print jobs using the standard protocol.
• The On setting processes raw binary PostScript print jobs.
USB With ENA
ENA Address
ENA Netmask
ENA Gateway
Sets the network address, netmask, or gateway information for an external print
server that is attached to the printer using a USB cable.
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
Parallel <x> menu
This menu appears only if an optional parallel card is installed.
Menu item Description
PCL SmartSwitch
On
O
Sets the printer to automatically switch to PCL emulation when a print job
received through a parallel port requires it, regardless of the default printer
language
Notes:
• On is the factory default setting.
• When the O setting is used, the printer does not examine incoming
data.
• When the O setting is used, the printer uses PostScript emulation if PS
SmartSwitch is set to On. It uses the default printer language specified in
the Setup menu if PS SmartSwitch is set to
O.
Understanding printer menus 117
Loading ...
Loading ...
Loading ...