Tripp Lite B126-1A1-WHD1 Owner's Manual

Loading ...

Installation

Notes:

1. Ensure all equipment being connected is powered off prior to installation.

2. For best results, position the IR transmitter near the HDMI source and the IR receiver near the

display.

3. If the wireless signal is obstructed by walls (especially brick or glass) or other obstacles, the

quality and distance of the signal will likely be reduced.

Blu-ray

™

/DVD

HDMI Extender

Tx Transmitter

HDMI Extender

Rx Receiver

TV (Up to 1080p)

HDMI Cable

1. Optional: Attach the included mounting hardware to the transmitter and receiver

units, then mount them to a desired location.

2. Connect the HDMI source device to the HDMI Input port on the transmitter unit

using an HDMI cable, such as Tripp Lite’s P568-Series High Speed HDMI Cables.

3. Connect the IR-OUT (Tx) cable to the IR-OUT port on the transmitter unit.

Note: IR-OUT (Tx) cable has IR-OUT marked on the bottom of the IR bulb. Place the bulb of

the IR-OUT (Tx) cable in an area with a direct line of sight to the HDMI source device (e.g.

Blu-ray player).

4. Connect the external power supply to the transmitter unit and plug it into a

Tripp Lite Surge Protector, Uninterruptible Power Supply (UPS) or Power Distribution

Unit (PDU).

5. Connect the HDMI display to the HDMI Output port on the receiver unit using a

P568-Series High Speed HDMI Cable.

6. Connect the IR-IN (Rx) extension cable to the IR-IN port on the receiver unit.

Note: IR-IN (Rx) cable has IR-IN marked on the bottom of the IR bulb. Place the bulb of the

IR receiver cable in the general area you will be using the source device’s remote control.

7. Connect the external power supply to the receiver unit, and plug it into a Tripp Lite

Surge Protector, UPS or PDU.

8. Turn on power to the connected equipment.

If using two receivers, repeat steps 5-8 for the second unit.

18-07-214-933699.indb 4 8/9/2018 2:12:19 PM

Loading ...

Tripp Lite B126-1A1-WHD1 Wireless HDMI Extender Kit