Fisher & Paykel DW24UT4I2 Integrated Dishwasher, Tall, Sanitize

User Manual - Page 32

For DW24UT4I2.

PDF File Manual, 39 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
32
PROBLEM POSSIBLE CAUSE WHAT TO DO
Dishwasher will
not start
No power. Ensure the dishwasher is plugged in and
the power supply is turned on at the wall.
The door is not
properly closed.
Close the door.
has not been pressed. Press .
Water tap not turned on. Ensure water is connected and turned on.
Blocked strainer in water
inlet hose.
Check the strainer and clean if necessary
– it is located where the water inlet hose
screws into the tap.
Lower spray
arm rotates
with difficulty
Spray arm holes are
blocked by small items or
food particles.
Clean the spray arm. Refer to
'Maintenance' for instructions.
Cover of
detergent
dispenser
cannot be
closed
Detergent compartment has
been overfilled.
Remove detergent until the cover can
be closed.
Detergent dispenser is
clogged with remnants
of detergent.
Wipe dispenser out with a damp
cloth. Dry the dispenser before
adding detergent.
Remnants of
detergent stuck
inside dispenser
Compartment was damp
when filled with detergent.
Wipe dispenser out with a damp
cloth. Dry the dispenser before
adding detergent.
Utensils are blocking
the detergent dispenser
from opening.
Ensure there are no large utensils
positioned in a way that will stop the
dispenser cover from opening when the
dishwasher door is closed.
Water
remains inside
dishwasher
after wash
has ended
Blocked drain connection. Check that drain connection is free
from blockages.
Drain hose is crimped, bent,
or blocked.
Check the drain hose and straighten
if needed.
Pump is jammed. Clean the pump. See 'Fault codes'
for instructions.
Filter(s) blocked. Clean the filter(s). See 'Maintenance'
for instructions.
Foaming Incorrect amount or type of
detergent used.
Refer to 'Detergent' or consult the
detergent manufacturer’s instructions.
Too much egg in the
wash load.
Increase the amount of detergent.
Rinse aid dosage level
too high.
Decrease the rinse aid dosage.
Rinse aid spills not wiped up. Ensure that all rinse aid spills are wiped
up when they occur.
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...