Loading ...
Loading ...
Loading ...
Your trimmer has been shipped completely assembled and
ready for use. After removing it from the carton, inspect it
carefully to make sure no breakage ordamage has occurred
duringshipping. Ifany parts are damaged ormissing, contact
your nearest Sears Retail Store to obtain replacement parts
before attempting tooperate trimmer. A 1/2 in.diameter flush
trim bit,owner's manual, twowrenches, and case areincluded
in the carton.
WARNING:
If any parts are missing, do notoperate your trimmer until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
i
KNOW YOUR TRIMMER
See Figure 1.
Before attempting to use your trimmer, familiadze yourself
with all operating features and safety requirements.
Your trimmer isa versatile woodworking toolwhich willgive
you years of trouble-free performance. It isengineered with
the professional in mind, but its ease of operation allows the
amateur to produce work which is beautiful and precise.
As the name implies your trimmer can be used for trimming
laminates. When used with recommended accessories, it
becomes even more versatile.
WARNING:
Do not allow familiarity with your trimmer to make you
careless. Remember that a careless fraction ofa second
is sufficient to inflict severe injury.
HEAVY DUTY MOTOR
Your trimmer has a powerful 3.8 amp motor with sufficient
powerto handle many trimmingjobs. Itiscapable ifdelivering
3/4 horsepower for heavy duty performance. The motoralso
has removable brushes for ease of servicing.
SWITCH
To turn your trimmer ON, slide the switch on top of the
trimmer to ON position. Return the switch to OFF position
when finished.
DEPTH OF CUTSCALE
Your tdmmer's cutting depth can be adjusted by using the
depth of cut scale. To adjust to desired depth, loosen the
wing bolt and move the base untilthe tip of the cutter lightly
comes in contact with the surface. The depth of cutting is
zero at this point. Move the base further tothe relative mark
on the scale that corresponds with your desired cutting
depth. Finally, tighten the wingbolt. You willgetyour desired
depth of cutting.
WARNING:
The operation ofany trimmer can result inforeign objects
being thrown into your eyes, which can result in severe
eye damage. Beforestarting powertooloperation, always
wear safety goggles or safety glasses with side shields
and a full face shield when needed. We recommend wide
vision safety mask for use over eyeglasses or standard
safety glasses with side shields.
WARNING:
Do not attempt to modify this tool or create accessories
notrecommended for usewiththistool.Any suchalteration
or modification ismisuse and could result in a hazardous
condition leading to possible serious personal injury.
APPLICATIONS
(Use only for the purpose listed below)
• Smooth, professional trimming of laminates.
• Cabinet making, trimming counter tops, and finishing
work.
• Trimming wood and plastics.
Page 6
Loading ...
Loading ...
Loading ...