Loading ...
Loading ...
Loading ...
- 13 -
Testing
1. Before use, test repaired hoists and hoists that have not been used for a
year or more.
2. Check all functions of the hoist, including lifting and lowering, with the
hoist unloaded first.
3. After testing in the unloaded state, attach a 200 Ib. load and retest to
check proper load control and to check brake operation.
4. Test the trip-setting of limit devices under no-load conditions. Test first by
hand, if practical, and then under slowest speed. Test with increasing
speeds up to maximum speed. Check that actuating mechanisms are
located so that they will trip the switches or limiting devices in sufficient
time to stop motion without causing damage to any part of the hoist.
Made In China
Loading ...