Loading ...
Loading ...
Loading ...
9
bromic.com/heat
INSTALLATION INSTRUCTIONS - CEILING MOUNTED HEATER CONTINUED...
Tools/Parts Required (not Included)
Eclipse Pendant Control
Remote control
(with wall holder and
screws)
WARNING
This heater MUST be installed by an licensed electrical contractor. Do no
t perform maintenance,
or carry out installation or assembly procedure while electrical power is switched on. Wait 2
hours after switching o the heater before handling to prevent touching hot surfaces.
For longest product life and to maintain product appearance, position heater under cover and
protect from rain and weather.
!
IMPORTANT
The appliance must be installed such that the heater head is level with the ground.
The appliance must be mouted on a solid surface, and it is the responsibility of the
installer to assess the suitibility of the mounting surface.
Minimum distance between heaters measured from edge of heater must be at
least 500 mm.
!
Box 3 Contents
• Bolts for fastening to Ceiling surface
• Phillips Head Screw Driver
• Step Ladder
• 2 strong people to help with lifting & assembly
• Spirit Level
!
Caution – Glass – Handle with care
• Care must be taken during installation. After removing packaging, glass must be inspected for
damage before use. If damage to the appliance is suspected, discontinue use immediately and
contact the supplier.
• Check for damage to the appliance before each use. The heater must not be used if the glass
panel or any other part of the heater is damaged. If damage to the appliance is suspected,
discontinue use immediately and contact the supplier.
• Care must be taken around the appliance to ensure it is not damaged. Ball games that could
accidentally hit the heater must not be played around the appliance. To protect appliance do
not remove cardboard packaging from head assembly until it is mounted to arm and base.
Loading ...
Loading ...
Loading ...