Loading ...
Loading ...
Loading ...
5
CHANGING THE BATTERY
1. Remove Computer (No. 33) from Main Frame (No. 1) and disconnect the link wire of Sensor
(No. 10) from the Computer (No. 33).
2. Remove the battery from the backside of Computer (No. 33).
3. Insert the new battery to the backside of Computer (No. 33). Ensure that the positive side of
the battery which is labeled with a + sign is facing upward once the new battery is in place.
4. Insert the link wire of Sensor (No. 10) into the wire inserting hole on the back of Computer (No.
33).
5. Insert the Computer (No. 33) into Main Frame (No. 1).
Adjusting the Exercise Band Length
To Lengthen Exercise Band
To Shorten Exercise Band
Push one side of the exercise band down and
then pull the bottom of the exercise band
downward as shown in the picture below.
Repeat this process until the exercise band is at
the desired length.
NOTE: This adjustment decreases the tension on
the exercise bands.
Push the exercise band upward from the
bottom and then pull one side of the top
exercise band up as shown in the picture
below.
Repeat this process until the exercise band is
at the desired length.
NOTE: This adjustment increases the tension
on the exercise bands.
NOTE: When lengthening the exercise band, only one side of the exercise band can be pushed
down. If the side that you are trying to push down does not move, try the other side of the exercise
band.
BATTERY
10
33
WIRE INSERTING HOLE
BATTERY SEAT
BATTERY
Loading ...
Loading ...
Loading ...