Loading ...
Loading ...
3
IMPORTANT SAFETY INSTRUCTIONS
1. Read and understand the owner’s manual before assembly and operation.
2. Do not load scissor lift beyond its rated capacity.
3. Do not allow people to sit or ride on scissor lift.
4. Always secure load in center of table before raising, lowering or moving scissor lift.
5. Do not transport loads in the raised position.
6. Use on smooth, level, finished floors only.
7. Pull release lever fully to allow load to descend in a controlled manner.
8. Keep hands and feet clear of table when lowering load.
9. Failure to comply with the above warnings may result in personal injury and/or property damage.
Specifications
Model Number ......................................................................................................................................... SLT-330F
Stock Number ............................................................................................................................................. 140771
Capacity (lbs) .................................................................................................................................................... 330
Table Size, L x W (in) ..................................................................................................................... 27-1/2 x 17-3/4
Maximum Height (in) ..................................................................................................................................... 28-3/4
Minimum Height (in) ........................................................................................................................................ 8-5/8
Handle Height (in) ......................................................................................................................................... 34-1/8
Strokes (without load) to Reach Maximum Height ............................................................................................. 16
Wheel Diameter (in.) ............................................................................................................................................. 5
Overall Length (in) ............................................................................................................................................... 36
Net Weight (lbs) .................................................................................................................................................. 88
Shipping Weight (lbs) ........................................................................................................................................ 108
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, JET reserves the right to change specifications at any time and without prior notice,
without incurring obligations.
Operation
Note: The scissor lift table comes pre-assembled
and ready to use. However, during transit air may
have seeped into the pump. To bleed air out of the
hydraulic system, raise and lower the table several
times to work any air bubbles out of the pump.
1. The table is raised by pumping the foot lever
(B, Figure 1).
2. To lower the table, slowly pull the release lever
fully. This allows the table to lower in a slow,
controllable manner.
3. Before loading, always lock the caster brake
by pressing the lock (A, Figure 1).
Folding Handle
1. Lower the table.
2. Push the rod (C, Figure 1) back.
3. Fold the handle flat across the table.
Maintenance
1. Lubricate each friction point monthly with #2
tube grease.
2. Check the movement and wear of wheels.
3. Check for oil leakage from the hydraulic
cylinder. Add hydraulic oil as needed.
4. Always store with table in lowered position
when not in use.
Figure 1
Loading ...
Loading ...
Loading ...