Tripp Lite B126-2A0 Owner's Manual

Loading ...

Connect the external power supply to the transmitter unit and

plug the transmitter unit into a Tripp Lite Surge Suppressor, Power

Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The

green RJ45 LEDs on the B126-002 and B126-004 and the red LED

on the B126-004 will illuminate to indicate that the unit is receiving

power from the external power supply.

Using Cat5e/6 cable, connect a RJ45 OUTPUT port on the transmitter

unit to the RJ45 INPUT port on the B126-110 repeater unit.

Connect a monitor to the HDMI OUTPUT port on the repeater unit

using a Tripp Lite P568-Series High-Speed HDMI Cable.

Connect the external power supply to the remote/repeater unit and

plug the remote/repeater unit into a Tripp Lite Surge Suppressor, PDU

or UPS. The green power and RJ45 LEDs will illuminate to indicate

that the unit is receiving power from the external power supply.

Up to 4 units can be daisy-chained (3 repeaters and 1 active receiver). To

add additional repeater units, proceed to step 8. To ﬁnish your installation

with a B126-2A0 1x2 receiver unit, proceed to step 11.

Using Cat5e/6 cable, connect the RJ45 port on the repeater unit

marked OUTPUT to the RJ45 port on a second repeater unit marked

INPUT.

Connect a monitor to the HDMI OUTPUT port on the repeater unit

using a Tripp Lite P568-Series High-Speed HDMI Cable.

Connect the external power supply to the remote/repeater unit and

plug the remote/repeater unit into a Tripp Lite Surge Suppressor,

PDU or UPS. The green power and green RJ45 LEDs will illuminate

to indicate that the unit is receiving power from the external power

supply.

Extender/Splitter with

Remote/Repeater Installation

Loading ...

Tripp Lite B126-2A0 2-Port HDMI over Cat5/6 Active Extender/Splitter, Remote Receiver