Documents: Go to download!
- Owner's manual - (English, French)
- Package Contents
- Headset Controls
- Setup (pair) for PS4
- PROSPECS GLASSES FRIENDLY DESIGN
- Charging with PS4
- Charging with XBOX
- Remove the ear pad
Table of contents
Turtle Beach STEALTH 300 - QUICK START GUIDE
Package Contents
Headset Controls
Mic Mute: Flip up mic to mute
EQ Presets
- 1 tone = Signature Sound
- 2 tones = Bass Boost
- 3 tones = Bass + Treble Boost
- 4 tones = Treble Boost
Setup (pair) for PS4
1.Go to Settings >> Devices >> Audio Devices
2. Set Input & Output Device to Headset Connected to Controller
3. Set Output to Headphones to All Audio
4. Set Volume Control (Headphones} level to maximum
5. Select Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone
PROSPECS GLASSES FRIENDLY DESIGN
Originally created for the Elite Pro Tournament Gaming Headset, Turtle Beach’s exclusive ProSpecs™ glasses friendly technology is built into the Stealth 300, featuring an advanced ear cushion design and materials that allow gamers who wear glasses to finally play in comfort.
Charging with PS4
The Stealth 300 uses a rechargeable battery. Make sure to charge it regularly.
Headset Storage:
Always charge your headset before storing it for any extended period of time (greater than 3 months). Never store the unit in temperatures above 113°F/45°C.
Charging with XBOX
- Plug the Micro-USB end of the USB Charge Cable into the headset.
- Plug the USB end of the USB Charge Cable into a free USB port on the console itself.
- The headset will charge to full within a few hours. When fully charged, the LED will blink Green.
The headset will charge to full within a few hours. Once charged, the headset will have a battery life of over 40 hours.
Be sure to charge the headset regularly. Always charge your headset before storing it for any extended period of time (greater than 3 months). Never store the unit above temperatures of 113°F/45°C.
Remove the ear pad
1. Remove the left ear pad, start by pulling the ear pad straight up using your thumb.
2. Once you've released the cloth from the lip on top, pull the ear pad straight back and it should slip right off.
To replace the ear pad, follow the same process in reverse.
See other models: X|S TBS-3303-01 TBS-3345-01 TBS-3455-01 TBS-3555-01