Loading ...
Loading ...
Loading ...
IMPORTANT: Oven will preheat for approximately 7 to 10 minutes. At end of
programmed Cook Time,oven will shut off automatically; retained heat will continue
to cook food. Clock controlled cooking is not recommended for baked items that
require a preheated oven, such as cakes, cookies, pies, breads. For these foods,
place food in preheated oven, then use Timer to signal end of baking time. At the
end of programmed Cook Time, the oven will shut off automatically and continuous
"beeps" will signal until the Cancel/Off Pad is touched.
To set ovento start at futuretime and shut off automatically:
1. Follow preceding Steps 1-4.
5. TouchStop Time Pad.
Indicator WordsSETSTOP TIME will flash, Display will show thecalculated stop
time based on current time of day and cook time.
6. Turn Set Dial clockwise. A stop time can only be accepted for later in the day.
NOTE: Since food continues to cook if left in the oven, it is suggested that the clock
controls be used primarily to start the oven when no one is in the kitchen. Provisions
should be made to have the food removed as soon as the signal has sounded.
EXAMPLE: If at 10 o'clock you set the oven for 3500 for baking and 2 hours and
30 minutes cooking time, the calculated stop time would be "12:30". The Display
would show: J12:30SFf ST(_T_E _ _E
Ifyou want the stop time to be 1 o'clock, turn the Set Dial until "1:00" appears in the
Display Window. Three seconds after turning dial, the Display Window will return
to current time of day, thus showing:
At the end of the delayed period, the DELAY Indicator Word will go off and the oven
will beginto heat. 75owill be shown.As theoven heats, theDisplay will show a
rise inincrements of5°until programmed temperature is reached.At the end of
programmed Cook Time, the ovenwill shut off automatically and continuous
"beeps" will be heard. Touch Cancel/Off Pad to cancel beeps.
To recall timefunction programmed: Touch the appropriate time pad.
To cancel: Touch Cancel/Off Pad.
NOTE: If more than 30 seconds elapse between touching a function pad and i
i
turning the Set Dial, the oven is not set and Display will return to previous Display. j
13
Loading ...
Loading ...
Loading ...