Loading ...
Safety information
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
* IMPORTANT- Save these instructionsfor
local inspector's use.
. IMPORTANT- Observe all governing codes
and ordinances.
* Note to installer - Be sure to leave these
instructions with the Consumer.
* Note to Consumer - Keep these instructions with
your Owner's Manual for future reference.
Skill Level- Installation of this appliance requires
basic mechanical and electrical skills.
* Completion time - 1 hour.
* Proper installation isthe responsibility of the installer.
* Product failure due to improper installation is not
covered under the Warranty. See Owner's Manual
for warranty information.
iMPORTANT
* Use this oven only for its intended purpose.
Never use the oven for warming or heating a room
Prolonged use of the oven without proper ventilation
can be hazardous.
CAUTION:
For personal safety, remove house fuse or
oven circuit breaker before beginning
installation to avoid severe or fatal shock injury.
CAUTION'.
For personal safety, the mounting surface
must be capable of supporting the cabinet
load, in addition to the added weight of the 75 pound
product, plus additional oven loads of up to 50 pounds
or a total weight of 125 pounds.
CAUTION:
For personal safety this product cannot be
installed in cabinet arrangements such as an
island, a peninsula or below a countertop.
MJSE EN GARDE :
Pour votre s_curit_ personnelle, retirez les
fusibles de la maison ou le disjoncteur du
four avant I'installation, pour _viter des blessures
graves ou m_me le dCc_s pouvant _tre caus6 par un
choc _lectrique.
NllSE EN GARDE :
Pour votre s_curit_ personnelle, la surface de
montage dolt _tre capable de supporter le
poids du cabinet, en plus du poids supplCmentaire du
produit, soit 34 kg, en plus du poids suppl_mentaire du
four pouvant aller jusqu'_ 22,7 kg, ou un poids total de
56,7 kg.
MJSE EN GARDE :
Pour votre s_curit_ personnelle, ce produit
ne peut _tre install_ dans des arrangements
d'armoires dont un _lot, une p_ninsule ou le dessous
d'un comptoir.
CONTENTS
Design Information
Models Available ..............................................................3
Product Dimensions and Clearances ............................3
Tools Required ..................................................................3
Parts Supplied ..................................................................3
Advance Planning ..........................................................4
Installation Preparation
Electrical Requirements ................................................5
Prepare the Opening ......................................................6
Remove the Packaging ....................................................7
Installation Instructions
Step 1,Slide the Oven into the Cutout ..........................8
Step 2, Install Bottom Trim ..............................................8
Step 3, Install Side Trim ..................................................9
Step 4, Install Mounting Screws ....................................9
Step 5, Finalize Installation ............................................9
2
Loading ...
Loading ...
Loading ...