Loading ...
Loading ...
Loading ...
7, Select WATER LEVEL
y"
MEDIUM
SMALL | LARGE
WATER LEVEL
Select the load size setting most suitable for your load, Small will
add a low amount of water for smaller loads and Large will add
the most amount of water for large or bulky loads, Items need to
move freely,
8, Select WASH TEMPERATURE
COOL WARM
V_*'_'_#_ auto temp
COLD _, HOT
WASH TEMPERATURE
all cold rinses
Once you select a cycle, select the desired wash temperature
by turning the WASH TEMPERATURE knob to the appropriate
setting based on your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Cool
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Colors that bleed
or fade
Light soils
Cold
This is the temperature from your Dark colors that
faucet, If your tap cold water is very bleed or fade
cold, warm water may be added Light soils
to assist in soil removal and help
dissolve detergent.
9, Select FABRIC SOFTENER On or Off
LCJ
OFF ON
\ /
FABRIC SOFTENER
Set FABRIC SOFTENER to ON if you want to add fabric
softener.
IMPORTANT: Fabric Softener option must be selected to "On"
to ensure proper distribution at correct time in cycle,
10. Pull out Cycle knob to begin wash
cycle
pull to start
p_,htostop CASUAL
LIGHT 6===J _SPIN
REGULAR10 OFF
REGULAR10 6 LIGHT
NORMAL HEAVY14\\-- \ _ IRINSE
PRE-WASH_ /OE_
OFF_ I _ 10 HEAVY
SPIN _ _ 6REGULAR
_' 4 LIGHT
/DELICATE
RINSE %
RINSE
Close the washer lid and pull out the Cycle knob to start the
washer.
NOTE: Some washers will only fill with the lid in the closed
position.
To add a garment after washer starts:
Push in the Cycle knob to stop the washer.
Open the lid and add the item(s).
Close the lid and pull the Cycle knob out to resume the cycle.
Do not leave the lid open unattended once the washer has
started filling.
For best performance do not interrupt washer cycle once the
washer has been started.
10
Loading ...
Loading ...
Loading ...