Loading ...
Loading ...
Loading ...
ENGLISH
4
Minimum Gauge for Cord Sets
Volts
Total Length of Cord in Feet
(meters)
120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7)
240 V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)
Ampere Rating
American Wire Gauge
More
Than
Not
More
Than
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
The label on your tool may include the following symbols. The
symbols and their definitions are asfollows:
V ......................... volts
Hz .......................hertz
min ..................... minutes
or DC ......direct current
...................... Class I Construction
(grounded)
…/min ..............per minute
BPM .................... beats per minute
IPM ..................... impacts per minute
RPM .................... revolutions per
minute
sfpm ................... surface feet per
minute
SPM .................... strokes per minute
A ......................... amperes
W ........................watts
or AC ...........alternating current
or AC/DC .... alternating or
direct current
...................... Class II
Construction
(double insulated)
n
o
.......................no load speed
n .........................rated speed
......................earthing terminal
.....................safety alert symbol
.....................visible radiation
..................... wear respiratory
protection
..................... wear eye
protection
..................... wear hearing
protection
..................... read all
documentation
CSPM .................. cut strokes per
minute
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
COMPONENTS (FIG. A)
WARNING: Never modify the power
tool or any part of it. Damage or personal injury
couldresult.
Refer to Figure A at the beginning of this manual for a
complete list ofcomponents.
Intended Use
This hedge trimmer is designed for residential
trimmingapplications.
DO NOT use under wet conditions or in presence of
flammable liquids orgases.
This hedge trimmer is a residential power tool. DO NOT
let children come into contact with the tool. Supervision is
required when inexperienced operators use thistool.
ASSEMBLY
WARNING: To reduce the risk of
serious personal injury, turn unit off and
disconnect it from power source before making
any adjustments or removing/installing
attachments or accessories. An accidental start-up
can causeinjury.
Assembly Tools Required (Not Supplied)
• Phillips Screwdriver
Attaching Guard to trimmer
WARNING: Only use with handle and
guard properly assembled to hedge trimmer.
The use of the hedge trimmer without the proper
guard or handle provided may result in serious
personalinjury.
The trimmer is shipped with the guard unattached to the
trimmer. To attach the guard:
• Remove guard retaining screw
10
with the Phillips
screwdriver (notsupplied).
• Position the guard in place as shown in Fig.B. Ensuring
the guard slots into the grooves on theunit.
Fig. B
10
• Insert the guard retaining screw
10
into the opening
on the side of the guard and tighten securely as shown
in Fig.C.
Fig. C
10
Attaching Extension Cord to Trimmer
WARNING: Ensure the trigger switch
is not engaged to reduce the risk of starting the
applianceaccidentally.
A cord retainer is incorporated into the rear of the handle on
the powerhead.
Loading ...
Loading ...
Loading ...