Loading ...
Loading ...
Loading ...
22
Remote control storage area
Maintenance and Service
Turn off the unit and pull out the plug before maintenance or send the unit to service center.
1. Surface cleaning
Clean the unit surface with a wet and soft cloth, but do not use chemical solvents such as alcohol or gasoline to avoid
any damage to the unit.
2. Filter cleaning
Clean the filter every two weeks
Note：If the filter is blocked by dust or any other things, it would influence the unit performance.
1.1 Clean filter
1）Grip the filter handle and take it out gently in correct direction shown by the arrow.
2）Hold hand positions with your hands, take filters out in correct direction shown by the arrow.
Note：1）Use even force to take out the filter to avoid any twist or damage to the filter.
2）Clean the filters gently in warm water (about 40℃) mixed with detergent, and dry in the shade.
Notes: 1、Do not squash the mesh.
2、Do not hit the mesh with sharp objects or a brush.
1.2 Installation of the filter
1）Aim at slot and push filters in even force toward into slot gently to avoid any damage.
3. Clean the handle position and the storage area for remote controls.
1) Take out the remote control (as Photo 22).
Loading ...
Loading ...
Loading ...